sc300 miss firing issue
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2013
Location: va
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
sc300 miss firing issue
Hey, I have an issue with missing firing that happened out of the blue and isn't consistent. When I relocated my wiring harness that was under my front driver side wheel well I unplugged the battery ever since then I have had a miss firing issue. It sounds like a dead miss fire. When I un hook the battery for a couple hours and hook it back up it runs perfectly for 5 minutes then starts miss firing again. Every time I unplug the battery terminals for a lil while and connect them again it runs fine and then starts miss firing about 5 minutes later. Anyone had this issue before??? I went back and made sure all the connecters from the wiring harness were connected properly and still have this issue. Please post any information that could potentially help me I am completely lost at this point and don't know what to do next. Thanks,
Last edited by 92300TURBO; 09-05-13 at 12:43 PM. Reason: to add details
#3
Driver School Candidate
Thread Starter
Join Date: Apr 2013
Location: va
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
92 SC300, 192k miles on the body but the motor was completely rebuilt 30k miles ago. The 02 sensors was hard wired in about 3 months ago when I installed my emanage ultimate piggyback system.
Thread
Thread Starter
Forum
Replies
Last Post
Schroeck83
LX - 3rd Gen (2008-2021)
3
09-01-17 02:32 AM
diamondgs4
Lexus Audio, Video, Security & Electronics
1
09-03-02 05:46 PM