Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Problems with opening driver door all the way

Thread Tools
 
Search this Thread
 
Old 02-03-14 | 01:12 PM
  #1  
kmartinez1's Avatar
kmartinez1
Thread Starter
Driver
 
Joined: Jan 2014
Posts: 131
Likes: 0
From: ohio
Exclamation Problems with opening driver door all the way

I have a 92 sc400 that I bought about a month ago. For some reason the driver side door is having trouble opening all the way and I was wondering if anyone could give me some advice what to do. Thank you
Old 02-03-14 | 02:08 PM
  #2  
Ali SC3's Avatar
Ali SC3
Lexus Champion
CL Folding 100000
iTrader: (10)
 
Joined: Oct 2007
Posts: 10,768
Likes: 440
From: CO
Default

Welcome to CL, please post in the proper sub-forum. moves to maintanance.
what is it doing, is it catching on something? is it sagging alot on the hinge? need more info.
Old 02-03-14 | 03:55 PM
  #3  
kmartinez1's Avatar
kmartinez1
Thread Starter
Driver
 
Joined: Jan 2014
Posts: 131
Likes: 0
From: ohio
Default

I think there is something wrong with the hinge but not sure. when i open the door, it gets stuck on the fender. had the fender pulled out so it can open a little better, but the door still hits the fender
Old 02-04-14 | 09:16 AM
  #4  
Ali SC3's Avatar
Ali SC3
Lexus Champion
CL Folding 100000
iTrader: (10)
 
Joined: Oct 2007
Posts: 10,768
Likes: 440
From: CO
Default

ok that is the hinge. do a search for sagging and door hinge and you will see its a common problem. once you replace the hinge it will stop hitting the fender when its opening, and then it should open fine after that. may need a little fender repair though after its fixed.
there is also some info on this on soarer central its even a problem on JDM models.

try not to lean too hard on the door when getting out of the car, I have always thought that adds to the problem.
try and use the handles at the top instead to swing out of the seat tarzan style.
Old 02-04-14 | 11:13 AM
  #5  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 35
From: NM
Default

The hinge is one of the most intricate engineering on the entire SC.

https://www.clublexus.com/forums/sc-...7-seconds.html

http://www.jkwebdesign.co.uk/lexusclub/doors.htm
Old 02-17-14 | 09:59 AM
  #6  
kmartinez1's Avatar
kmartinez1
Thread Starter
Driver
 
Joined: Jan 2014
Posts: 131
Likes: 0
From: ohio
Default

okay thankyou
Old 03-17-14 | 12:58 PM
  #7  
kmartinez1's Avatar
kmartinez1
Thread Starter
Driver
 
Joined: Jan 2014
Posts: 131
Likes: 0
From: ohio
Default

So i pulled off my driver side fender so I can open my door all the way. I noticed that the door has some movement up and down. It also has some movement side to side. the door seems to get harder to open the further I open it
Old 03-17-14 | 02:13 PM
  #8  
Ali SC3's Avatar
Ali SC3
Lexus Champion
CL Folding 100000
iTrader: (10)
 
Joined: Oct 2007
Posts: 10,768
Likes: 440
From: CO
Default

That means your hinge has seen better days. when the hinge is worn out, it doesn't open right and the door hits the fender. If you have to take the fender off to open the door all the way, the problem isn't the fender or the door, its the hinge, you need a new or good used one.
Old 03-17-14 | 03:34 PM
  #9  
kmartinez1's Avatar
kmartinez1
Thread Starter
Driver
 
Joined: Jan 2014
Posts: 131
Likes: 0
From: ohio
Default

ok i will replace and see if it does better
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tymboo
Performance & Maintenance
30
02-23-16 01:21 PM
TheDamSC
SC- 1st Gen (1992-2000)
10
06-20-14 08:28 PM
kez
SC- 1st Gen (1992-2000)
2
07-23-09 01:50 PM
97SC
SC- 1st Gen (1992-2000)
3
12-19-03 02:24 PM
LEXBOGGY
SC- 1st Gen (1992-2000)
3
05-29-03 06:41 PM



Quick Reply: Problems with opening driver door all the way



All times are GMT -7. The time now is 01:47 PM.