is WR intake a universal intake system
04-02-03, 07:09 PM
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2003
Location: tx
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
is WR intake a universal intake system
hey guys ive been doing searches and unable to find the info out. i was wondering if u could help me, do you know the site where i could order my WR intake from? ive saved up 2 grand from bed bath and beyond and ready to start spend! =)
04-02-03, 07:36 PM
#2
Lexus Champion
Join Date: Apr 2002
Location: Glued to my desk.
Posts: 3,746
Likes: 0
Received 0 Likes
on
0 Posts
WR does make an intake just for the SC. Check their website under intakes. Do you have and SC300 or 400?
http://www.weapon-r.com
http://www.weapon-r.com
Last edited by Vegassc400; 04-02-03 at 07:37 PM.
04-02-03, 07:44 PM
#3
Driver School Candidate
Thread Starter
Join Date: Feb 2003
Location: tx
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
i actually got the sc4, my mom got the new sc430 and i was like "dude this cars better than hers". but yeah, i saw that site from a google search and i was loooking through there, it looks like its only for the sc3 tho, unless its universal. i also cannot find any sites (IE eautoworks.com or overboost.com) that deal with an intake kit, i just find the different parts. thanks for the help, i dont want to buy anything before i know it fits my car. looking forward to the smart people helping me out, thanks in advance
i think therefore i drive fast- great qoute
i think therefore i drive fast- great qoute
04-02-03, 08:04 PM
#4
Rookie
Join Date: Feb 2003
Location: Kansas
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BIGONKER
i actually got the sc4, my mom got the new sc430 and i was like "dude this cars better than hers". but yeah, i saw that site from a google search and i was loooking through there, it looks like its only for the sc3 tho, unless its universal. i also cannot find any sites (IE eautoworks.com or overboost.com) that deal with an intake kit, i just find the different parts. thanks for the help, i dont want to buy anything before i know it fits my car. looking forward to the smart people helping me out, thanks in advance
I recommend doing a search for the SC400 BFI DIY instructions. Most people have achieved respectable results without spending a lot of money or time - and there's no question that it'll fit .
i think therefore i drive fast- great qoute
i actually got the sc4, my mom got the new sc430 and i was like "dude this cars better than hers". but yeah, i saw that site from a google search and i was loooking through there, it looks like its only for the sc3 tho, unless its universal. i also cannot find any sites (IE eautoworks.com or overboost.com) that deal with an intake kit, i just find the different parts. thanks for the help, i dont want to buy anything before i know it fits my car. looking forward to the smart people helping me out, thanks in advance
I recommend doing a search for the SC400 BFI DIY instructions. Most people have achieved respectable results without spending a lot of money or time - and there's no question that it'll fit .
i think therefore i drive fast- great qoute
04-03-03, 10:10 AM
#6
Lexus Champion
Join Date: Apr 2002
Location: Glued to my desk.
Posts: 3,746
Likes: 0
Received 0 Likes
on
0 Posts
The best intake designed so far is the BFI. They have some pretty detailed instructions and even templates on planetsoarer.com. It's a DIY project. You can save the money and get either a torque converter or ECU. good luck.
Trending Topics
04-03-03, 06:54 PM
#8
Lexus Champion
Join Date: Apr 2002
Location: Glued to my desk.
Posts: 3,746
Likes: 0
Received 0 Likes
on
0 Posts
www.planetsoarer.com
They have templates you can download and use. You can make the cover anything you want. Black plastic to blend in or you can even use an aluminum cover for the WR heat shield type of look. Pretty cheap to make too. Should cost you no more than $20. Good luck.
They have templates you can download and use. You can make the cover anything you want. Black plastic to blend in or you can even use an aluminum cover for the WR heat shield type of look. Pretty cheap to make too. Should cost you no more than $20. Good luck.
04-04-03, 12:00 PM
#10
Lexus Champion
Join Date: Apr 2002
Location: Glued to my desk.
Posts: 3,746
Likes: 0
Received 0 Likes
on
0 Posts
I actually do have the WR intake, exhaust and ECU. I love all of them. However, I didn't notice as much of a gain with the WR intiake as other people did with the BFI. I really wouldn't be able to give a fair comparison of both until I did the BFI and dyno'd both.
Thread
Thread Starter
Forum
Replies
Last Post