SP57 Install
#22
gadget, why do you recommend just drilling your old union bolt instead of picking it up from a IS300? i can find junkyard IS300s all over and get one for cheap; is it not as good or something?
what size lines are those? they look like -6AN
and this is prolly a dumb question; but it just hit me...
i'm assuming the oil drain outlet on the turbo needs to be located on the BOTTOM from how the turbo is mounted correct?
what size lines are those? they look like -6AN
and this is prolly a dumb question; but it just hit me...
i'm assuming the oil drain outlet on the turbo needs to be located on the BOTTOM from how the turbo is mounted correct?
#24
Bean....the reason I suggest drilling your existing bolt is....The bolt was $35.00, it is drilled and tapped, though I am unsure of the size. My oil supply line was 4an with a 1/8" NPT fitting, so I drilled and tapped it for the size that I had.
The oil return line is a 10an, and it is on the bottom of the turbo. Hope this helps
The oil return line is a 10an, and it is on the bottom of the turbo. Hope this helps
#25
Question
Does anyone know the best location for the VPC pressure and temp sensors. I can only find the locations for the turbo intake . Thanks!
gadgetSC-t
PS - will be getting rid of one of these cheap once its running well
gadgetSC-t
PS - will be getting rid of one of these cheap once its running well
#28
Scott....I did a drop in install and used the existing wiring. The only thing I did different was to use neoprene rubber wrapped around the pump and securing it to the mount with a hose clamp. In the pic you see the hose clamp....I went in the second time with the rubber because I wanted to secure it better.
#30
Re: update
Originally posted by gadgetSC
Jon - Hurry up....I need someone to play with...a partner in crime
Jon - Hurry up....I need someone to play with...a partner in crime
Looks like she's coming back together real nice, I can see your attention to detail, i.e. scrubbing the deposits off the pistons, etc. I'm sure it'll run super-strong, you just can't go wrong with HKS. I'd like to come by 'the lab' within the next few days and check in on the progress, i'll PM you later...