92 SC300 Mass Air Flow Sensor
12-12-20, 09:20 AM
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2020
Location: MO
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
92 SC300 Mass Air Flow Sensor
My 92 SC300 is in need of a Mass Air Flow Sensor. I’ve tried cleaning it and after letting it dry and reassembling it, I drove it around 2-3 miles. Was told they sometimes have to relearn after being discovered. Pulling in to a parts store my car died. Turns over finally not won’t start. Anyone have a suggestion or know where I can find a MAF SENSOR? Thanks
12-12-20, 10:29 AM
#2
Lexus Fanatic
12-12-20, 05:09 PM
#3
Ebay used replacement or rockauto. You only need to replace the sensor itself not the whole housing.
And for all pre-obd2 SC300’s and SC400’s you cannot clean the Karman-Vortex sensor (early MAF). If you do so you will permanently damage it.
We can’t ever clean one of these early style MAF units but it’s also unnecessary.
And for all pre-obd2 SC300’s and SC400’s you cannot clean the Karman-Vortex sensor (early MAF). If you do so you will permanently damage it.
We can’t ever clean one of these early style MAF units but it’s also unnecessary.
Last edited by KahnBB6; 12-12-20 at 05:14 PM.
The following 2 users liked this post by KahnBB6:
Bimmerbill (12-13-20),
boughtnew (11-15-21)
Thread
Thread Starter
Forum
Replies
Last Post