Question regarding Invidia q300
#1
Question regarding Invidia q300
I bought q300 for my Lexus Is300 and came with 2 metal rings and 2 flange gasket. What are the 2 metal rings for? Do they go inside the flange gasket? Also, it was missing the lock nuts, can I use the original nuts on the car or these are welded?
#2
When I installed mine, I didn't use the gaskets or metal rings.
You can re-use your OEM donuts and the Invidia nuts and you're good to go.
The OEM nuts are welded on the factory axle back, so just undo the bolts.
You can re-use your OEM donuts and the Invidia nuts and you're good to go.
The OEM nuts are welded on the factory axle back, so just undo the bolts.
#3
The following users liked this post:
Lex_Giorgio (12-21-23)
#4
#5
#7
Straight fit without any issue. This was my first time installing catback exhaust and it only took me about an hour by myself. Enjoy the random exhaust pop!
Trending Topics
#8
Make sure you don't have any leaks.
Yes people do the Invidia RC350 axle back or the Tanabe Revel for the quad look.
-Josh
Yes people do the Invidia RC350 axle back or the Tanabe Revel for the quad look.
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Thread
Thread Starter
Forum
Replies
Last Post
O. L. T.
Wheels, Tires & Brakes Forum
4
03-09-06 10:03 PM