Attention all turbo, superchared, No2 driven GS owners
#1
Forum Administrator
Thread Starter
iTrader: (2)
Attention all turbo, superchared, No2 driven GS owners
I'd like to update the Forced Induction Registry and need your help.
Please post here, post in the FI Registry thread or PM me with details needed to update your car's entry (or to add it).
In general I need screen name, model, RWHP, RWTQ, PSI, quarter mile info and general notes on setup.
https://www.clublexus.com/forums/sho...d.php?t=141909
If you've gone from supercharged to turbo or other setups, I'd like to capture both, so please post both sets of details.
Thank you!
Please post here, post in the FI Registry thread or PM me with details needed to update your car's entry (or to add it).
In general I need screen name, model, RWHP, RWTQ, PSI, quarter mile info and general notes on setup.
https://www.clublexus.com/forums/sho...d.php?t=141909
If you've gone from supercharged to turbo or other setups, I'd like to capture both, so please post both sets of details.
Thank you!
#3
Northern California Regional Officer
iTrader: (5)
Good Numbers out of the RMM SC !
In all the dyno's I have witnessed, myself and many others, it is interesting to note that your second run (on the chart) was the highest HP.
We usually do no more than 3 pulls for that very reason. Atleast with the GS this is historically what I have observed. If we go past 3 runs then we cool the car off a while and put 2-3 fans on the motor for 20 min. This has resulted in a HP increase because the engine (especially the intake manifold) have been cooled, but the motor, tranny and diff are all warmed up. We have seen roughly a 10 HP gain by doing this. This is also a perfect example of how to mess with the HP #s. Imagine a gain by 10HP just by cooling. That's a better upgrade than a lot of mods out there.
In all the dyno's I have witnessed, myself and many others, it is interesting to note that your second run (on the chart) was the highest HP.
We usually do no more than 3 pulls for that very reason. Atleast with the GS this is historically what I have observed. If we go past 3 runs then we cool the car off a while and put 2-3 fans on the motor for 20 min. This has resulted in a HP increase because the engine (especially the intake manifold) have been cooled, but the motor, tranny and diff are all warmed up. We have seen roughly a 10 HP gain by doing this. This is also a perfect example of how to mess with the HP #s. Imagine a gain by 10HP just by cooling. That's a better upgrade than a lot of mods out there.
#4
Lexus Test Driver
iTrader: (1)
RMM Supercharger
1999 GS400
I bought a RMM supercharger last year at the end of April.
I got it from another member kylnchgs4
Installed at RMM in Huntington Beach Calif
Tuned at XS Engingeering also in Huntington Beach
Did Body Valve upgrade at California Performance Transmissions also in Huntington Beach.
Have 310cc injectors, Apexi S-AFC2 for fuel management. I also have the P.I. 2800 stall TC,
and the RMM 3.76 LSD
With the 3.33 pulley XS Engineering came up with
360RWHP and 309lbs. of torque.
I love it and no I have not been out to the track.
Ivan
3dog
I bought a RMM supercharger last year at the end of April.
I got it from another member kylnchgs4
Installed at RMM in Huntington Beach Calif
Tuned at XS Engingeering also in Huntington Beach
Did Body Valve upgrade at California Performance Transmissions also in Huntington Beach.
Have 310cc injectors, Apexi S-AFC2 for fuel management. I also have the P.I. 2800 stall TC,
and the RMM 3.76 LSD
With the 3.33 pulley XS Engineering came up with
360RWHP and 309lbs. of torque.
I love it and no I have not been out to the track.
Ivan
3dog
#5
Forum Administrator
Thread Starter
iTrader: (2)
Thanks guys, keep 'em coming.
I know there are at least two turbo GS400's out there that need to send updated info
I know there are at least two turbo GS400's out there that need to send updated info
#6
hey dave,
i'm in the middle of a turbo project - bought the kit from jeff (tturbopimp) back in feb 2005 (think it was originally kensgs400tt) - as the usual story goes, it's still a work in progress (best guess is it's ready in 6 to 8 weeks now - i wanted over 8 months for the rods which never came & had to order from another source...that's it's own thread, but i'm not going to bother with it)...with my rmm s/c that i sold to ivan (3 dog), i was running the 2.87 pulley on 370cc injectors and best dyno was 400hp to the wheels (don't remember the tq, but can send you the dyno). will post numbers on the turbo gs when it's up and running - thanks!
kenny
i'm in the middle of a turbo project - bought the kit from jeff (tturbopimp) back in feb 2005 (think it was originally kensgs400tt) - as the usual story goes, it's still a work in progress (best guess is it's ready in 6 to 8 weeks now - i wanted over 8 months for the rods which never came & had to order from another source...that's it's own thread, but i'm not going to bother with it)...with my rmm s/c that i sold to ivan (3 dog), i was running the 2.87 pulley on 370cc injectors and best dyno was 400hp to the wheels (don't remember the tq, but can send you the dyno). will post numbers on the turbo gs when it's up and running - thanks!
kenny
#7
Northern California Regional Officer
iTrader: (5)
Originally Posted by klynchgs4
with my rmm s/c that i sold to ivan (3 dog), i was running the 2.87 pulley on 370cc injectors and best dyno was 400hp to the wheels (don't remember the tq, but can send you the dyno).
Wow 400HP ! I don't believe I have seen a higher output ever reported from the RMM SC kit.
I would LOVE to see the Dyno graph on the RMM SC.
Please DO post that one up as well.
Trending Topics
#10
I'll have some dyno results probably next week. My car is running but needs the map-ecu to take off the stoch maf. Changing the fuel rail and injectors also in 2 days. Boosting good but haven't felt the true potential yet. Thanks again to manictechracing.com for everything, including the dyno.
#11
Originally Posted by Burton
2JZ-GTE VVTi Swaped
281 WHP 267 ft/lbs stock boost through stock gs300 exhaust
13.20 @ 112.86 at 18psi
should have new dyno and track times soon.
Ben
281 WHP 267 ft/lbs stock boost through stock gs300 exhaust
13.20 @ 112.86 at 18psi
should have new dyno and track times soon.
Ben
is gs3 that much lighter? or is the your turbo playing tricks? LOL
#12
Originally Posted by MrJAAY
WHOA dude, how r u busting 13.2 with only 280wheel? i got 270WHP + 265WTQ and i did 14.9 at 94mph...
is gs3 that much lighter? or is the your turbo playing tricks? LOL
is gs3 that much lighter? or is the your turbo playing tricks? LOL
Burten I wanted to ask you, have you converted yours to true twin Yet or your still sequential?
#14
Originally Posted by MrJAAY
doesn't it run slower as a true twin? didn't toyota design it in sequenstial on purpose?
No way, I drove it in sequential for months and was actually a little dissapointed in how it pulled, yes it had a little more low end power than but mid to top wasn't anything to write home about. We converted it to true twin and the difference was night and day as far as power. Yes its a little slow off the line that and my car weighs like 4400 pounds with me in it but it really takes off after they kick in together and you really feel the little throw back in your seat that I never felt at 1st. Real nice surge and on the highways its just heaven. Most Supra guys convert their sequentials to true right after they get them. I think Toyota did sequential more for an even power band as opposed to having more top end than low end.
#15
Lexus Champion
many supra guys said TTC doesnt really help. Yes you do feel a sudden burst of power but does not help with time. But it does help keep the second turbo from crappy out on higher boost.