97 Lexus SC400 Supercharger project
#1
Lexus Test Driver
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
UPDATED 4/26/07 with some Videos!
UPDATED 4/10/07 with pictures!
97 Lexus SC400 Supercharger project
The purpose of this thread is to share progress with other CL members as my project progresses. Up to this point I have been laying the ground work for supercharging my car. To this point, my modifications are as follows. Keep in mind, at this point I am learning, I’m not the teacher.
20" Work Rezax II staggerd wheels
Tien HA's
Cold air in Modification (BFI)
TT BBK
Optima batter w/billet box
S & S tri-y Headers
Dual 2 1/2" mandrel bent stainless exhaust
All Magnaflow cats, X-Pipe, resonators, Mufflers and tips
Dragon 2200 rpm stall torque converter
B&M transmission cooler
Supra TT LSD rearend
Light weight tension pulley
Auto meter carbon fiber series Pyrometer gauge
Auto meter carbon fiber series Oil pressure gauge
Auto meter carbon fiber series Voltage gauge
Auto meter carbon fiber series Boost gauge
AEM wide band 02 gauge
Sylvania Silver Star High and low beams
Perfect power SMT6 piggyback computer
Recaro Trend Tan leather bucket seats
Walbro
More More More TMTL!
NX Wet Nitrous system with purge fire Ice bottle heater (not installed yet)
My supercharger kit has finally arrived so my project is underway. I still have a lot of preparation to do prior to the installation so this is pretty much a teaser thread at this point. I still need to get to a Dyno to get a baseline before I tear it apart. Here is a picture of the kit, These parts will either be polished or painted prior to installation. Lots to do! I will update upon progress, FYI It might be slow getting started!
UPDATED 4/10/07 with pictures!
97 Lexus SC400 Supercharger project
The purpose of this thread is to share progress with other CL members as my project progresses. Up to this point I have been laying the ground work for supercharging my car. To this point, my modifications are as follows. Keep in mind, at this point I am learning, I’m not the teacher.
20" Work Rezax II staggerd wheels
Tien HA's
Cold air in Modification (BFI)
TT BBK
Optima batter w/billet box
S & S tri-y Headers
Dual 2 1/2" mandrel bent stainless exhaust
All Magnaflow cats, X-Pipe, resonators, Mufflers and tips
Dragon 2200 rpm stall torque converter
B&M transmission cooler
Supra TT LSD rearend
Light weight tension pulley
Auto meter carbon fiber series Pyrometer gauge
Auto meter carbon fiber series Oil pressure gauge
Auto meter carbon fiber series Voltage gauge
Auto meter carbon fiber series Boost gauge
AEM wide band 02 gauge
Sylvania Silver Star High and low beams
Perfect power SMT6 piggyback computer
Recaro Trend Tan leather bucket seats
Walbro
More More More TMTL!
NX Wet Nitrous system with purge fire Ice bottle heater (not installed yet)
My supercharger kit has finally arrived so my project is underway. I still have a lot of preparation to do prior to the installation so this is pretty much a teaser thread at this point. I still need to get to a Dyno to get a baseline before I tear it apart. Here is a picture of the kit, These parts will either be polished or painted prior to installation. Lots to do! I will update upon progress, FYI It might be slow getting started!
Last edited by ScottURnot; 05-06-07 at 10:16 AM. Reason: Updated mods
Trending Topics
#8
Lexus Test Driver
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
In reply to the questions. The supercharger is an Eaton M90. The kit comes from a Australian company called Richwood Technologies. I will keep you all updated! Thanks for all your support!
#11
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
I am very interested in this build because it is almost identical to what I want to do. Take LOTS AND LOTS of pics and update often!!!
How much boost do you plan to run and how much nitrous do you plan to hit it with? Also, why didn't you go with 3" exhaust all the way back?
#12
Banned - could not follow forum rules
Join Date: Oct 2005
Location: CA
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Scotturnoti - You got all the goodies that I have on my SC400....Gotta love the Dragon torque converter right? S&S Headers work great for mid to high end N/A power....How is the SMT6 engine management working out, is that a complete ECU re-wire...The SMT7 is even a better unit...Expensive though...
What are your final power goals once the Eaton Charger is installed on your 97? What are you doing with your existing Nitrous system?...Dumping it or adding it on in combination with the charger? Wicked stuff if you can pull it all off...You may have some serious traction problems with all that low end grunt...
Sorry for all the questions, I just like what you got going on...Good luck with everything...
Oh lastly how much was the complete charger and where did you buy it from?
What are your final power goals once the Eaton Charger is installed on your 97? What are you doing with your existing Nitrous system?...Dumping it or adding it on in combination with the charger? Wicked stuff if you can pull it all off...You may have some serious traction problems with all that low end grunt...
Sorry for all the questions, I just like what you got going on...Good luck with everything...
Oh lastly how much was the complete charger and where did you buy it from?
#13
Lexus Test Driver
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Naa, they dont mind shipping
richwoodtechnologies@bigpond.com for more info.
I am very interested in this build because it is almost identical to what I want to do. Take LOTS AND LOTS of pics and update often!!!
How much boost do you plan to run and how much nitrous do you plan to hit it with? Also, why didn't you go with 3" exhaust all the way back?
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
I am very interested in this build because it is almost identical to what I want to do. Take LOTS AND LOTS of pics and update often!!!
How much boost do you plan to run and how much nitrous do you plan to hit it with? Also, why didn't you go with 3" exhaust all the way back?
I felt 2 1/2" exhaust would work well with 9 PSI boost.
![Dunno](https://www.clublexus.com/forums/images/smilies/13879dunno.gif)
#14
Lexus Test Driver
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Scotturnoti - You got all the goodies that I have on my SC400....Gotta love the Dragon torque converter right?I love it too! S&S Headers work great for mid to high end N/A power....How is the SMT6 engine management working out, is that a complete ECU re-wire...The SMT7 is even a better unit...Expensive though... The SMT6 is working good thus far but only street tuning, I have been trying to locate a dyno in my state or close that has tuning experience with it, thus far no luck
What are your final power goals once the Eaton Charger is installed on your 97? I hope to get 350RWHP with out NOS, with nos 425. maybe thats optimistic but hey, you gotta have goals! What are you doing with your existing Nitrous system?...Dumping it or adding it on in combination with the charger? The NX sytem will go on after the Charger is working solid Wicked stuff if you can pull it all off...You may have some serious traction problems with all that low end grunt...
Sorry for all the questions, I just like what you got going on...Good luck with everything...
Oh lastly how much was the complete charger and where did you buy it from? I bought it from Richwood, I'm trying to not remind myself of $$$ invested in this project.
What are your final power goals once the Eaton Charger is installed on your 97? I hope to get 350RWHP with out NOS, with nos 425. maybe thats optimistic but hey, you gotta have goals! What are you doing with your existing Nitrous system?...Dumping it or adding it on in combination with the charger? The NX sytem will go on after the Charger is working solid Wicked stuff if you can pull it all off...You may have some serious traction problems with all that low end grunt...
Sorry for all the questions, I just like what you got going on...Good luck with everything...
Oh lastly how much was the complete charger and where did you buy it from? I bought it from Richwood, I'm trying to not remind myself of $$$ invested in this project.
![Sad](https://www.clublexus.com/forums/images/smilies/sad.gif)
#15
Lexus Champion
iTrader: (4)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Scott, nice looking kit...I k now you are going to get this all done the right way...Glad to see that Richwood is shipping them out...Boostin the SC400...It is finally becoming more common place...Soon, they may be running around like boosted SC300's...The 400 will get its long overdue respect...
Ryan
Ryan
Last edited by SC400TT; 09-28-06 at 02:42 AM.