My GS400 Borla exhaust Magnaflo X-pipe *video*
01-20-07, 02:48 PM
#1
My GS400 Borla exhaust Magnaflo X-pipe *video*
I know the car is filthy but I wanted to get you guys this video for those interested in this setup. Right click save-as please!! I am going to work on a better quality video later on. Thanks
Clicky
Clicky
Last edited by PRSUIT460; 01-30-07 at 06:25 AM.
Is it just the x-pipe and stock resonators? thanks 
01-20-07, 03:52 PM
#6
Lexus Champion
Join Date: Apr 2006
Location: georgia
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
I know the car is filthy but I wanted to get you guys this video for those interested in this setup. Right click save-as please!! I am going to work on a better quality video later on. Thanks
Right click save as...10.6mb
Right click save as...10.6mb
Trending Topics
01-20-07, 05:20 PM
#12
I am still running stock headers and converters. I have not really looked into aftermarket headers yet. From what I hear there are quite a few of them cracking. The 3 resonators were removed and the X-piece was put in place. The Borla is just a rear-section which I bought new for $550. The stainless X-section was $79 from Jegs. The muffler shop charged me $100 to do the piping to the axle-back. I am going to be re-doing the center section now that I have it how I want it to sound. I am going to have my friend make it out of stainless so that the whole system is stainless. Right now the center section is aluminized.
At first when I had removed the resonators, the shop had made the exhaust into a true dual system, without an X or an H section. DO NOT do that unless you want your car to sound like a truck with glasspacks. It was horrible. I am finally happy with the results.
At first when I had removed the resonators, the shop had made the exhaust into a true dual system, without an X or an H section. DO NOT do that unless you want your car to sound like a truck with glasspacks. It was horrible. I am finally happy with the results.
