Evil Twin

Could you guys share some dimensions on how large you went on the coolers? Depth? How large can you go without clearance problems? How much of an increase in fluid capacity you gained? How much of a temperature drop you saw? Do the any of the units have a temperature by-pass so that you don't run the oil too cool to remove water condensation?
Thanks

ZIP

I used the TRD tranny cooler designed for the Tacoma. Excellent quality and compact design. http://www.toyotapartstrd.com/mc-bbg-ec.aspx . I fabbed up brackets and mounted it in front of the RH fender liner. The JDM Aristo JZS161 comes with a vented liner I assume for airflow thru the factory I/C? I guess you could cut out the "louvers" moulded into your USDM ones.

GILLEXUS

iTrader: (14)

This is the one I used.
http://www.bulkpart.com/Merchant2/me...roduct_Count=1

This is where I put mine.

nanotech

iTrader: (2)

Lots of good information!

So many people just installed it in the middle on the front. Some said to the lower right side. What is the "best" place to have it? Any thoughts?

I am in the market of getting one.

Which Cooler do you prefer? B&M or Hayden?

thanks!

reefdvrjim

A Hayden is what they put in my car.... it soulds like a great idea

GILLEXUS

iTrader: (14)

I think the Hyden and B&M condensed units are about the same just a matter of preference. I choose the right side of the radiator only because it looked like a slightly wider opening of air.Maybe not that big a deal.

quickex99

iTrader: (2)

Just ordered my B&M 70264 kit.. Im super exited!

Does anyone know off hand if any local places sell the steel braided teflon coated line .. Places such as Autozone, Advance Auto, Napa?

Thanks in advance!

GILLEXUS

iTrader: (14)

I think they only sell the regular rubber /steel braided ones.

sakataj

iTrader: (182)

ok since im kinda a noob to the lexus world of modifiying even though this is my 4th lexus. anyone have a pic of where the lines actually connect?

sakataj

iTrader: (182)

??????????????????

JeffTsai

iTrader: (1)

sakataj, the cooler will connect to the stock trans oil cooler line. It's the two rubber hoses going into the bottom of the radiator. Just unhook those and run a new hose to the cooler. Or some people run a new cooler in line with the stock one to get double cooling.

Oh and did someone say transmission cooler(s)?

LexFather

^^ lol, u had to take a pic in front the BBK


Wait so that is it? I'm still confused looking at your pic, can someone circle? lol

sakataj

iTrader: (182)

thanks for the pic.........

3UZFTE

Has anyone thought about pulling on from a wrecked Tundra or better yet a lexus GX or LX? The tundra is about 6x10 inches, and the Lexus's are almost twice that. Just a thought of keeping it in the family...

bg_281

I just ordered mine its a Hayden (the same as the one above) scored it for $27 with my employee discount at NAPA...