FACTORY TOUR: Tanabe Exhaust Manufacturing
09-04-07, 02:28 PM
#1
Former Vendor
Thread Starter
FACTORY TOUR: Tanabe Exhaust Manufacturing
As a Club Lexus sponsor we are increasing our efforts to answer all of the questions that members have and will be monitoring the forum more closely than in the past. The following article has been hosted on our site, and I thought that it would be interesting to post this up as a tech article for the forum. There are also a few other tech articles hosted on the site, so if you would like to check them out please feel free to do so.
http://www.tanabe-usa.com/technology.asp
Tanabe high performance exhaust systems are made 100% in Japan at the Tanabe Shiga Factory. From the mufflers, piping, and even the hangars and flanges, Tanabe systems are constructed in-house, in their entirety. Each Tanabe exhaust component is made using a high level of engineering, hand-crafted care, and an unprecedented level of quality that creates a special bond with many owners who purchase these unique systems.
The exhaust manufacturing section of the Tanabe Shiga Factory employs some of the most advanced computer aided machinery, precision laser cutting tools, high quality materials and a group of highly dedicated, skilled craftsmen and engineers. During the R&D of each exhaust system, an in-house Bosch four wheel dynamometer is used to test power and function of each exhaust system.
An initial founding member of JASMA (Japan Sports Muffler Association) over 15 years ago, the Tanabe exhaust system is the only one of its kind to be completely manufactured and assembled in-house, in Japan, that is readily available to North America to have the highly coveted ISO9001 certification.
During each phase of production, each component undergoes an exhaustive series of inspections to ensure that the engineering requirements for material quality, fitment, weld quality and function are of the highest specification.
1. SET PIPING & MANDREL BENDING
Piping is the first component of the exhaust system to be created. Using engineering data gathered during R&D, the computer is programmed to cut the high grade SUS304 stainless piping to exact lengths and sections. The piping is then sent to the CNC mandrel bender, where engineering schematics and programs are loaded, and the machine produces exact replicas of the engineering department's production prototype piping. When the batch is finished, the piping is sorted and stored for assembly.
2. MUFFLER CONSTRUCTION
Many parts of the muffler construction phase are a Tanabe trade secret, which helps the exhaust systems acheive their beautiful, deep tone. During this phase, the computer is programmed for muffler type and vehicle application. This determines the internal construction type (chambered, loop or straight through) and most importantly, the density of the new Advantex internal packing material to be used. Each main muffler and sub muffler has a carefully calculated formula for packing material, to acheive an optimal balance of flow and noise reduction. High luster SUS304 sheets are cut to length, stamped with the Tanabe logo, and are then shaped according to canister type. The canister and internal assemblies are then assembled, and sealed by a highly precise robotic TIG welder.
3. BRANDING AND TIP CONSTRUCTION
Branding and identifier plates are tack welded by hand onto the completed muffler canisters, sub mufflers, resonators and piping sections. These identifiers contain a production number, part number, and the Tanabe logo and exhaust name, for authenticity and the highest level of quality assurance. The identifiers help the engineers track any minor changes they may make to an exhaust system design, and are an extra step Tanabe takes in quality production, which helped Tanabe receive the esteemed ISO9001 certification.
Tips are designed and constructed in house, and are sorted according to size, length and diameter for final assembly with the muffler and exhaust system piping.
4. HANGAR AND FLANGE CONSTRUCTION
Even all of the hangars and flanges found in Tanabe performance exhausts are completely constructed in-house. A combination of computer aided design, and human interaction are used to create these. The SUS304 hangar's sizes, diameters and lengths are determined during the R&D phase, and are bent and sorted according to vehicle make and model. The flanges are cut from SUS304 stainless steel using a CAD assisted precision laser cutter. The thickness of each flange is carefully determined by the engineering department for each vehicle, depending on placement on the exhaust system. On areas of higher stress, a stronger, thicker flange is used. On areas of lower stress, lighter weight pressed flanges are use. These flanges are manufactured and stored for assembly according to bolt pattern, pipe diameter, and application.
5. EXHAUST SYSTEM WELDING AND ASSEMBLY
Once all other exhaust components are completed, the finished pieces are sent for final assembly and welding. Tanabe's highly skilled welders perform the necessary manual functions that require a high level of craftsmanship and accuracy that are beyond the limitations of machine assisted production. A final inspection is performed on all of the pieces before being sent for packaging and boxing.
6. PACKAGING AND BOXING
The final product is delivered for cleaning treatment, for a quality finish. The exhaust system is then carefully packaged, wrapped, and boxed to protect the exhaust system and it's finish from external damage.
http://www.tanabe-usa.com/technology.asp
Tanabe high performance exhaust systems are made 100% in Japan at the Tanabe Shiga Factory. From the mufflers, piping, and even the hangars and flanges, Tanabe systems are constructed in-house, in their entirety. Each Tanabe exhaust component is made using a high level of engineering, hand-crafted care, and an unprecedented level of quality that creates a special bond with many owners who purchase these unique systems.
The exhaust manufacturing section of the Tanabe Shiga Factory employs some of the most advanced computer aided machinery, precision laser cutting tools, high quality materials and a group of highly dedicated, skilled craftsmen and engineers. During the R&D of each exhaust system, an in-house Bosch four wheel dynamometer is used to test power and function of each exhaust system.
An initial founding member of JASMA (Japan Sports Muffler Association) over 15 years ago, the Tanabe exhaust system is the only one of its kind to be completely manufactured and assembled in-house, in Japan, that is readily available to North America to have the highly coveted ISO9001 certification.
During each phase of production, each component undergoes an exhaustive series of inspections to ensure that the engineering requirements for material quality, fitment, weld quality and function are of the highest specification.
1. SET PIPING & MANDREL BENDING
Piping is the first component of the exhaust system to be created. Using engineering data gathered during R&D, the computer is programmed to cut the high grade SUS304 stainless piping to exact lengths and sections. The piping is then sent to the CNC mandrel bender, where engineering schematics and programs are loaded, and the machine produces exact replicas of the engineering department's production prototype piping. When the batch is finished, the piping is sorted and stored for assembly.
2. MUFFLER CONSTRUCTION
Many parts of the muffler construction phase are a Tanabe trade secret, which helps the exhaust systems acheive their beautiful, deep tone. During this phase, the computer is programmed for muffler type and vehicle application. This determines the internal construction type (chambered, loop or straight through) and most importantly, the density of the new Advantex internal packing material to be used. Each main muffler and sub muffler has a carefully calculated formula for packing material, to acheive an optimal balance of flow and noise reduction. High luster SUS304 sheets are cut to length, stamped with the Tanabe logo, and are then shaped according to canister type. The canister and internal assemblies are then assembled, and sealed by a highly precise robotic TIG welder.
3. BRANDING AND TIP CONSTRUCTION
Branding and identifier plates are tack welded by hand onto the completed muffler canisters, sub mufflers, resonators and piping sections. These identifiers contain a production number, part number, and the Tanabe logo and exhaust name, for authenticity and the highest level of quality assurance. The identifiers help the engineers track any minor changes they may make to an exhaust system design, and are an extra step Tanabe takes in quality production, which helped Tanabe receive the esteemed ISO9001 certification.
Tips are designed and constructed in house, and are sorted according to size, length and diameter for final assembly with the muffler and exhaust system piping.
4. HANGAR AND FLANGE CONSTRUCTION
Even all of the hangars and flanges found in Tanabe performance exhausts are completely constructed in-house. A combination of computer aided design, and human interaction are used to create these. The SUS304 hangar's sizes, diameters and lengths are determined during the R&D phase, and are bent and sorted according to vehicle make and model. The flanges are cut from SUS304 stainless steel using a CAD assisted precision laser cutter. The thickness of each flange is carefully determined by the engineering department for each vehicle, depending on placement on the exhaust system. On areas of higher stress, a stronger, thicker flange is used. On areas of lower stress, lighter weight pressed flanges are use. These flanges are manufactured and stored for assembly according to bolt pattern, pipe diameter, and application.
5. EXHAUST SYSTEM WELDING AND ASSEMBLY
Once all other exhaust components are completed, the finished pieces are sent for final assembly and welding. Tanabe's highly skilled welders perform the necessary manual functions that require a high level of craftsmanship and accuracy that are beyond the limitations of machine assisted production. A final inspection is performed on all of the pieces before being sent for packaging and boxing.
6. PACKAGING AND BOXING
The final product is delivered for cleaning treatment, for a quality finish. The exhaust system is then carefully packaged, wrapped, and boxed to protect the exhaust system and it's finish from external damage.
09-04-07, 11:14 PM
#2
Lead Lap
Join Date: Mar 2007
Location: Boca Raton, FL
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for sharing this info. It gives the buyer greater confidence in the purchase of Tanabe products. It just happens that today (09-04-07) I ordered a Tanabe Medalion Touring for my 2008 IS350 that is due to arrive in a few weeks.
I presume that the 06/07 IS350 exhaust setup is the same as the 2008s? Can you verify please? Thanks....
I presume that the 06/07 IS350 exhaust setup is the same as the 2008s? Can you verify please? Thanks....
09-05-07, 03:38 AM
#4
Rookie
Join Date: Feb 2006
Location: belgium
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
approved
That gives me more confidense that i made a good choice in ordering a TANABE.The only thing is that i'm from belgium and that it's not allowed to drive with an exhaust without E-APPROVED label.BUT there are a lot of things you may not do in life!!
09-05-07, 08:54 AM
#5
Former Vendor
Thread Starter
Thank you for sharing this info. It gives the buyer greater confidence in the purchase of Tanabe products. It just happens that today (09-04-07) I ordered a Tanabe Medalion Touring for my 2008 IS350 that is due to arrive in a few weeks.
I presume that the 06/07 IS350 exhaust setup is the same as the 2008s? Can you verify please? Thanks....
I presume that the 06/07 IS350 exhaust setup is the same as the 2008s? Can you verify please? Thanks....
09-07-07, 07:02 PM
#6
Lead Lap
Join Date: May 2006
Location: Ottawa,Ontario
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Yes your factory in Tanabe Japan is very impressive.
I was wondering why your application of the Tanabe Medalion Touring for the IS350 was a bit lower on the left side. Of all the pictures I have seen, including on my own car, you can see the left muffler tip being slightly lower. Was the calculation for the original "mold" made by an automated method or by hand?
Just curious.
I was wondering why your application of the Tanabe Medalion Touring for the IS350 was a bit lower on the left side. Of all the pictures I have seen, including on my own car, you can see the left muffler tip being slightly lower. Was the calculation for the original "mold" made by an automated method or by hand?
Just curious.
09-08-07, 12:31 AM
#7
A few things you forgot to include:
1) Availability for the 2007 IS250?
2) Street/Emissions legal for all 50 states?
3) If possible, factory sound clips of the actual Tanabe system installed on both IS250/IS350 under load and idle.
1) Availability for the 2007 IS250?
2) Street/Emissions legal for all 50 states?
3) If possible, factory sound clips of the actual Tanabe system installed on both IS250/IS350 under load and idle.
Trending Topics
09-10-07, 09:42 AM
#9
Former Vendor
Thread Starter
Yes your factory in Tanabe Japan is very impressive.
I was wondering why your application of the Tanabe Medalion Touring for the IS350 was a bit lower on the left side. Of all the pictures I have seen, including on my own car, you can see the left muffler tip being slightly lower. Was the calculation for the original "mold" made by an automated method or by hand?
Just curious.
I was wondering why your application of the Tanabe Medalion Touring for the IS350 was a bit lower on the left side. Of all the pictures I have seen, including on my own car, you can see the left muffler tip being slightly lower. Was the calculation for the original "mold" made by an automated method or by hand?
Just curious.
You may want to check where the muffler portion of the exhaust bolts up to the rest of the piping. There will be some free play where it bolts up, so loosen the bolts and try adjusting it this way.
http://www.tanabe-usa.com/exhausts/e...tions.asp?id=7
2. Since the systems are catback, none of the emissions equipment is altered in any way. Most of our systems are under 93db which is street legal.
3. All of the sound clips can be found on our site. http://www.tanabe-usa.com/soundclips.asp
Glad that youre happy with the product! Which exhaust system do you have?
09-10-07, 05:29 PM
#13
Former Vendor
Thread Starter
The origional mold is actually designed by hand, and then that piece is sent to Japan to create a master jig. From there a sample production piece is created and test fitted. Once the piece is test fitted and dyno'ed, and the OK is given, then the piece goes into production.
You may want to check where the muffler portion of the exhaust bolts up to the rest of the piping. There will be some free play where it bolts up, so loosen the bolts and try adjusting it this way.
1. Please check out the site, under exhaust, "Applications" for avalibility.
http://www.tanabe-usa.com/exhausts/e...tions.asp?id=7
2. Since the systems are catback, none of the emissions equipment is altered in any way. Most of our systems are under 93db which is street legal.
3. All of the sound clips can be found on our site. http://www.tanabe-usa.com/soundclips.asp
Glad that youre happy with the product! Which exhaust system do you have?
You may want to check where the muffler portion of the exhaust bolts up to the rest of the piping. There will be some free play where it bolts up, so loosen the bolts and try adjusting it this way.
1. Please check out the site, under exhaust, "Applications" for avalibility.
http://www.tanabe-usa.com/exhausts/e...tions.asp?id=7
2. Since the systems are catback, none of the emissions equipment is altered in any way. Most of our systems are under 93db which is street legal.
3. All of the sound clips can be found on our site. http://www.tanabe-usa.com/soundclips.asp
Glad that youre happy with the product! Which exhaust system do you have?
Thats a great sounding exhaust.
09-11-07, 11:41 PM
#15
The Tanabe Medallion Touring exhaust is exactly the same for both the IS250 and the IS350, so that is good. There is a discrepancy on that website where you can look up the applications. The year states 06-06? Shouldn't it be 06-07? Because they should fit on the 2007 models IS right?