Bullet (Australia) Supercharger?
#47
You could invert the supercharger and then do a conventional air to air intercooler like the RM kit but I don't think there is enough room to go that route.
#48
#49
#50
#53
#54
What about it you lower your compression. Do you know why you are asking this question?
Wouldn't lowering the compression help a little with the detonation risk, and getting a steel hg help with durability?
I'm mechanically inclined, but not a car expert, so I'm just feeling out how hard this project would be before pursuing it... A Bullet kit retro doesn't sound impossible with some guidance and a mill...
#55
The 1uzfe from 1989 to 1997 and 1998 to 2000 are different. The manifold WILL NOT work on the GS400. The two engines have different head/manifold angle. Perhaps u should look into the Tundra TRD M90 supercharger. Its a direct bolt on.
#56
It will bolt on the post 97 1uzfe? What year Tundra S/C?
#58
post 97, meaning the 98 model, vvti. I did some searching and came up empty since that SC is no longer available. If you find a used one, the hood will need to be moded to clear the sc. Also, we would need to figure out how to tune it because I doubt the ecu will work on our cars.
Last edited by GS FONZy; 02-26-08 at 09:13 PM.
#59
FYI,
Maybe check w/ a few of the SC400 guys, good source of infro. A few of them have done a roots style S/C . I know its not the VVTI motor.
I believe ScottURnot used an Eaton M90 he may have info. on if they make an adapter plate that will allow it to mat up w/98+ intake/manifold.
Just a thought.
https://www.clublexus.com/forums/sho...d.php?t=240378
Maybe check w/ a few of the SC400 guys, good source of infro. A few of them have done a roots style S/C . I know its not the VVTI motor.
I believe ScottURnot used an Eaton M90 he may have info. on if they make an adapter plate that will allow it to mat up w/98+ intake/manifold.
Just a thought.
https://www.clublexus.com/forums/sho...d.php?t=240378
#60
It looks like Richwood Technologies is coming out with a supercharger kit:
----- Original Message -----
To: richwoodtechnologies@bigpond.com
Sent: Sunday, March 02, 2008 3:06 AM
Subject: GS400/430 supercharger?
"Do you make an Eaton M90 supercharger kit for the iuz-fe vvti V8 found in the 2nd gen Lexus GS 400/430?"
Reply:
"Yes we do, it is a fully Integrated supercharger, we will be releasing this shortly. Please check our web-site www.i-charger.com for updates.
Regards
Andrew"
----- Original Message -----
To: richwoodtechnologies@bigpond.com
Sent: Sunday, March 02, 2008 3:06 AM
Subject: GS400/430 supercharger?
"Do you make an Eaton M90 supercharger kit for the iuz-fe vvti V8 found in the 2nd gen Lexus GS 400/430?"
Reply:
"Yes we do, it is a fully Integrated supercharger, we will be releasing this shortly. Please check our web-site www.i-charger.com for updates.
Regards
Andrew"