GS4 track car build gets underway, 2jz, V160
#1
Pole Position
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Las Vegas NV
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
GS4 track car build gets underway, 2jz, V160
Updates everywhere but cage pics can be seen on page 11
well ok guys If any of you saw my first thread. I'm the one who bought "Jonny Tran's" mag car.(Come to find out so more shotty work was done) and that I was moving to Vegas before I could get the build underway.
here is a link to my introduction thread https://www.clublexus.com/forums/gs-...ab-stance.html
Pics will be up soon they are loading on photobucket as I type.
I just got done with the move from Florida to Las Vegas last weekend. Love it here already. I'm in a pretty good part of town next to everything so me likes.
Tuesday I took the car to a C.A.T. scale at TA trucker stop I-15 exit 33 to get the car weighed. With everything inside seats, amps, box, all the wood in the truck. The GS tipped the scales at 3940lbs. YIKES Yeah it was that fat. full tank
Wednesday I proceeded with the strip. Back seat came out, rear door panels, rear audio, and carpet. So pretty much everything from the front seats back was ripped out. Which will be up for sale. Once the front seats come out I'll have almost a full black interior FS except the dash. Plus the audio/visual.
Took it back to the same scale Thursday to find out I supposedly took off exactly 400 pounds. 3540lbs. I think they round up or down to the 40 mark or something I don't know but I think that was kinda odd. Full tank My plan is to get the car down into the 2800's with a cage. Wish me luck
I had to stop at that point before I went any further because there was a track event that happened today that I wanted to go to before I ripped everything out. The car did pretty well considering it still has the Aristo 2JZ auto attached to it but I can't wait for the V160. 01 Aristo turbo tranny will be FS soon also
The car will go up on jack stands tonight until the V160 swap is complete and more weight reduction happens. Also a full cage Is going it and hopefully I can find a company to make lexan windows for the car.
I order a freshly rebuilt V160(supra 6spd) Transmission from Titan Motorsports and it should be hear on Tuesday along with the IS300 manual conversion parts from L-Tuned. I can't wait to have the 6spd in the car it will make driving the car a dream.
I also want to make an announcement about Houston's shop SGP and Johnny Tran's craftsmanship. IT SUCKS!!! When I took the carpet up I found the body harness of the JDM Aristo and the body harness of the USDM GS spliced in using speaker wire to bridge the gap with only twisting the wires together and electrical tape. Also the rear deck looks like a grinder went to it to make bigger hole for the D&D 12in sub. Just horrible work. I haven't taken pics of everything yet but I will and I do intend on airing their dirty laundry. NEVER take your GS there for an Aristo swap or for anything else for that matter.
as of 9:16 pst I have 30of39 pics uploaded this thing is slow haha
well ok guys If any of you saw my first thread. I'm the one who bought "Jonny Tran's" mag car.(Come to find out so more shotty work was done) and that I was moving to Vegas before I could get the build underway.
here is a link to my introduction thread https://www.clublexus.com/forums/gs-...ab-stance.html
Pics will be up soon they are loading on photobucket as I type.
I just got done with the move from Florida to Las Vegas last weekend. Love it here already. I'm in a pretty good part of town next to everything so me likes.
Tuesday I took the car to a C.A.T. scale at TA trucker stop I-15 exit 33 to get the car weighed. With everything inside seats, amps, box, all the wood in the truck. The GS tipped the scales at 3940lbs. YIKES Yeah it was that fat. full tank
Wednesday I proceeded with the strip. Back seat came out, rear door panels, rear audio, and carpet. So pretty much everything from the front seats back was ripped out. Which will be up for sale. Once the front seats come out I'll have almost a full black interior FS except the dash. Plus the audio/visual.
Took it back to the same scale Thursday to find out I supposedly took off exactly 400 pounds. 3540lbs. I think they round up or down to the 40 mark or something I don't know but I think that was kinda odd. Full tank My plan is to get the car down into the 2800's with a cage. Wish me luck
I had to stop at that point before I went any further because there was a track event that happened today that I wanted to go to before I ripped everything out. The car did pretty well considering it still has the Aristo 2JZ auto attached to it but I can't wait for the V160. 01 Aristo turbo tranny will be FS soon also
The car will go up on jack stands tonight until the V160 swap is complete and more weight reduction happens. Also a full cage Is going it and hopefully I can find a company to make lexan windows for the car.
I order a freshly rebuilt V160(supra 6spd) Transmission from Titan Motorsports and it should be hear on Tuesday along with the IS300 manual conversion parts from L-Tuned. I can't wait to have the 6spd in the car it will make driving the car a dream.
I also want to make an announcement about Houston's shop SGP and Johnny Tran's craftsmanship. IT SUCKS!!! When I took the carpet up I found the body harness of the JDM Aristo and the body harness of the USDM GS spliced in using speaker wire to bridge the gap with only twisting the wires together and electrical tape. Also the rear deck looks like a grinder went to it to make bigger hole for the D&D 12in sub. Just horrible work. I haven't taken pics of everything yet but I will and I do intend on airing their dirty laundry. NEVER take your GS there for an Aristo swap or for anything else for that matter.
as of 9:16 pst I have 30of39 pics uploaded this thing is slow haha
Last edited by ExileLakai; 03-14-09 at 08:06 AM. Reason: link
#2
Pole Position
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Las Vegas NV
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
how the car looked before the strip.
I took the screen out... I have to find it. It might be a Florida...
the hole where the Airrunner tank used to be in.
After I was done this actually went up a full inch. I now have 2inches between the finder and the rim lip instead of 1.
I took the screen out... I have to find it. It might be a Florida...
the hole where the Airrunner tank used to be in.
After I was done this actually went up a full inch. I now have 2inches between the finder and the rim lip instead of 1.
#4
Moderator
iTrader: (21)
I really hope you don't gut the interior. An original black interior white exterior GS is extremely rare.
I'm excited to see what you have planned for this car but wouldn't it be easier to find a cheaper GS to tear apart? It seems like you're tearing apart everything but the engine.
I'm excited to see what you have planned for this car but wouldn't it be easier to find a cheaper GS to tear apart? It seems like you're tearing apart everything but the engine.
#6
Pole Position
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Las Vegas NV
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
I really hope you don't gut the interior. An original black interior white exterior GS is extremely rare.
I'm excited to see what you have planned for this car but wouldn't it be easier to find a cheaper GS to tear apart? It seems like you're tearing apart everything but the engine.
I'm excited to see what you have planned for this car but wouldn't it be easier to find a cheaper GS to tear apart? It seems like you're tearing apart everything but the engine.
The more I rip the car apart the more I feel I made the right decision. Repainted body panels, things just done halfass, etc I'm pretty surprise that it still runs... really! Plus with a salvage title resale value is crap which is why I got it so cheap. Also knowing what I know now about the car I just wouldn't feel right selling it to a unsuspecting buyer. There is a method to my madness everyone so just bear with me if this is painful for you to watch.
Trending Topics
#14
Pole Position
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Las Vegas NV
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Just to get a show of hands. who would like solid subframe bushings? I have a friend that owns a machine shop and i might have him make set. But it would be cheaper for me if I could get 5-10 in on them also so he isn't setting the machine up just to make one set. This would be for the more performance minded people since it would hurt ride quality a little for heaps of performance advantages. When my tranny gets here tomorrow. Fedex is late should have been here saturday! I'm thinking of dropping the subframe and start developing them. Just a thought. Any takers
*Mods if this does go down I would become a vendor before I took orders.
*Mods if this does go down I would become a vendor before I took orders.
#15
My plan is to get the car down into the 2800's with a cage.
By all means I am no expert, and it would be awesome to see you hit 2800, but that would be very extensive.
Goodluck, V160 would be awesome
-Jackson