Performance Forced induction, intakes, exhausts, torque converters, transmissions, etc.

Cold air intake . . .

Thread Tools
 
Search this Thread
 
Old 03-21-09, 12:31 PM
  #1  
al-ex-us
Driver
Thread Starter
 
al-ex-us's Avatar
 
Join Date: Feb 2009
Location: CA
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
Default Cold air intake . . .

Ok . . . I knew I would get to this section sooner or later. I am interested in upgrading my air filter with a rechargeable one. Is there a such thing as a cold air intake for my 98GS4? Where can I get one? What's the cost? What additional mods are needed for this upgrade?

Last edited by al-ex-us; 03-21-09 at 12:32 PM. Reason: bad grammar!
Old 03-23-09, 11:31 AM
  #2  
kamlung
Instructor
iTrader: (8)
 
kamlung's Avatar
 
Join Date: Feb 2009
Location: NJ
Posts: 1,133
Received 38 Likes on 31 Posts
Default

there are short rams that are available for the GS4... K&N SRT and Fujita/Injen... but you will need some tuning in order to get the A/F ratio correct and resolve your CEL...
Old 03-23-09, 05:09 PM
  #3  
evil00017
Pole Position
 
evil00017's Avatar
 
Join Date: Jul 2007
Location: CA
Posts: 380
Likes: 0
Received 1 Like on 1 Post
Default

I have a k&n and I have never had a CEL and this is the first I have read of a CEL being a issue on a gs400 when adding a intake.

The srt intake comes with a chip which has a a/f map on the chip. If you are looking to make the most hp the best way I have seen to do it is by going with a intake other than SRT such as K&N and puting a a/f controller such as the Apexi neo.

With the neo you can adjust your a/f ratios for the intake and any other mods you might do down the line.

I also noticed that you live in CA the k&n intake is the only intake as of now that is carb legal. That was on of the major deciding factors for me as well.
Old 03-23-09, 07:13 PM
  #4  
al-ex-us
Driver
Thread Starter
 
al-ex-us's Avatar
 
Join Date: Feb 2009
Location: CA
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
Default

Gotta any info where to get K & N Intake setup you are talking about? How much, by the way??
Old 03-24-09, 05:10 PM
  #5  
LEXISM
Lexus Champion
iTrader: (2)
 
LEXISM's Avatar
 
Join Date: Mar 2003
Location: LONG BEACH, SOCAL!
Posts: 3,467
Received 1 Like on 1 Post
Default

I have a cold air intake made by SRT
its the fist one that came out before the current one that is used now
JacobT was that original owner
Old 05-04-10, 01:05 PM
  #6  
lilsharky
Pole Position
iTrader: (6)
 
lilsharky's Avatar
 
Join Date: Sep 2008
Location: california
Posts: 236
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by LEXISM
I have a cold air intake made by SRT
its the fist one that came out before the current one that is used now
JacobT was that original owner
do you have any pictures of your srt installed?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ivnnln
GS - 2nd Gen (1998-2005)
3
09-13-09 08:10 PM
redhwangso
Performance
6
11-14-01 11:48 AM



Quick Reply: Cold air intake . . .



All times are GMT -7. The time now is 12:01 PM.