Joe Z Intake Pipe
#6
Lexus Fanatic
iTrader: (56)
^^ Been there, done that...
They just usally ask me "who the hell is Joe Z"..
All jokes aside.. SEMA put a big slow down at my manfuacturer end of last month..
As they were heavily involved on small projects that need attention.
So an update on all this is that we should be FULLY STOCKED on Intakes for the IS250, IS350 & IS-C , hopefully by the end of November or begining of December..
Polished units will be finished 1st, followed by Anodized Stealth Black, Silver and Gunmetal finishes..
Just in time for the stocking stuffer!!!
Thanks for being patient so far.
Best Regards,
Joe Z
They just usally ask me "who the hell is Joe Z"..
All jokes aside.. SEMA put a big slow down at my manfuacturer end of last month..
As they were heavily involved on small projects that need attention.
So an update on all this is that we should be FULLY STOCKED on Intakes for the IS250, IS350 & IS-C , hopefully by the end of November or begining of December..
Polished units will be finished 1st, followed by Anodized Stealth Black, Silver and Gunmetal finishes..
Just in time for the stocking stuffer!!!
Thanks for being patient so far.
Best Regards,
Joe Z
#7
I was going to buy a Joe-Z intake pipe from l-tunedparts because they are in stock, but the shipping cost was $30. That seems a little high to me to have it shipped to Texas. Are there any discount codes/shipping codes available?
Trending Topics
#8
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,063 Likes
on
586 Posts
Just order it from http://www.l-tunedparts.com/index.php. That's where I bought it and shipped to B.C.
Carson Toyota / Lexus Parts is currently the only Approved & Authorized Club Lexus Vendor, that can sell the intakes directly to members..
Joe Z
#9
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,063 Likes
on
586 Posts
Official Update
^^ Thanks for bringing my post in here!!
We received an influx of orders in the last several weeks which caused our current "Out of Stock" status..
I am working closely with my manufacturer to complete another batch by next week..
From there I will be able to fill Polished Finish Intakes quickly..
The Anodized Intake Finishes will take approx. an extra week to complete.
I hope to get all back orders and new orders filled for Carson by 1st to 2nd week of December (or sooner).
Joe Z
We received an influx of orders in the last several weeks which caused our current "Out of Stock" status..
I am working closely with my manufacturer to complete another batch by next week..
From there I will be able to fill Polished Finish Intakes quickly..
The Anodized Intake Finishes will take approx. an extra week to complete.
I hope to get all back orders and new orders filled for Carson by 1st to 2nd week of December (or sooner).
Joe Z
#10
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,063 Likes
on
586 Posts
Please give a call to Cesar in the Internet Parts Dept.
Average standard shipping fee, should be in the $10-12 ball park.
Please let me know if you still get a $30 quote, as that would be a problem.
Best Regards,
Joe Z
#11
I got it straightened out. Shipping was $12.50 which is much more like it. Got mine ordered and can't wait to install it! Thanks Joe Z!
#13
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,063 Likes
on
586 Posts
^^ OEM Filter will work fine as well... I used to use a Blitz Drop in Filter in my IS350..
In an effort to keep eveyone updated, today Carson is receiving a batch of Black IS250/IS350 Intakes, to fill current outstanding back orders..
By tomorrow, they will also be receiving inventory in the following available finishes: Black, Gunmetal & Polished
Gunmetal & Polished are very limited in quantities.
Only a handful come in these finishes in each production run.
Also, just a reminder this unit fits several Lexus Models:
IS250, IS250awd, IS350 and ALL IS-C Models.
** ALSO FITS THE 06+ GS350 & GS450h **
Best Regards,
&
Happy Holidays
Joe Z
In an effort to keep eveyone updated, today Carson is receiving a batch of Black IS250/IS350 Intakes, to fill current outstanding back orders..
By tomorrow, they will also be receiving inventory in the following available finishes: Black, Gunmetal & Polished
Gunmetal & Polished are very limited in quantities.
Only a handful come in these finishes in each production run.
Also, just a reminder this unit fits several Lexus Models:
IS250, IS250awd, IS350 and ALL IS-C Models.
** ALSO FITS THE 06+ GS350 & GS450h **
Best Regards,
&
Happy Holidays
Joe Z
#15
Hi JoeZ,
May i know what is the cost like to send to Singapore?
May i know what is the cost like to send to Singapore?
^^ OEM Filter will work fine as well... I used to use a Blitz Drop in Filter in my IS350..
In an effort to keep eveyone updated, today Carson is receiving a batch of Black IS250/IS350 Intakes, to fill current outstanding back orders..
By tomorrow, they will also be receiving inventory in the following available finishes: Black, Gunmetal & Polished
Gunmetal & Polished are very limited in quantities.
Only a handful come in these finishes in each production run.
Also, just a reminder this unit fits several Lexus Models:
IS250, IS250awd, IS350 and ALL IS-C Models.
** ALSO FITS THE 06+ GS350 & GS450h **
Best Regards,
&
Happy Holidays
Joe Z
In an effort to keep eveyone updated, today Carson is receiving a batch of Black IS250/IS350 Intakes, to fill current outstanding back orders..
By tomorrow, they will also be receiving inventory in the following available finishes: Black, Gunmetal & Polished
Gunmetal & Polished are very limited in quantities.
Only a handful come in these finishes in each production run.
Also, just a reminder this unit fits several Lexus Models:
IS250, IS250awd, IS350 and ALL IS-C Models.
** ALSO FITS THE 06+ GS350 & GS450h **
Best Regards,
&
Happy Holidays
Joe Z
Last edited by Gtti; 12-22-09 at 08:16 PM.