vscalais

iTrader: (1)

Got a bog standard 2001 GS300.

Anyone suggest some quick performance tips?
What gives the best bang for your buck?

Cheers

Frankdorn

iTrader: (7)

Wow, man. I know you're newer, but sheesh. Ya gotta look around a bit. The "search" button will give you a ton of info.

To lend a quick hand, though, here's your first tip: unless you're really good with a wrench, your best bang for your buck is trading in for a GS400 or 430.

kamlung

iTrader: (8)

wow NSW - an aussie... welcome mate... GS3's are rare enough down there let alone finds a GS4... and with a GS4, petrol prices would be unbearable by the litre...

but what is your budget and how much are you willing to spend... there are intake, header, exhaust options... do you also have a speedshop that can tune?

speedaddic

iTrader: (10)

there is a 1uz following in Aussie...heck, they make independent Throttle Bodies down there or our 1uz motor. You can do a turbo on your GS3, or just intake header, exhaust

vscalais

iTrader: (1)

Yeah, we didn't get the GS400 or GS430. Would be a lovely conversion but the regulators would quickly pull the pin.

Was thinking about intake and chipping by a specialist tuner. Some cars are more successful than others.

That's why - yes I could search - but I wanted to know what works best.

Cheers

Rock-a-Lex

iTrader: (4)

Agreed! There is a HUGE GS4XX following in Australia! Most of the extreme SC setups come from there and most utilizing the M90 or the next size up for their custom SC kits. As you can see from some recent threads we (ClubLexus) are just starting to talk about this notion in this performance section.

kamlung

iTrader: (8)

who makes the ITB setup? im going next month!!!

sakataj

iTrader: (182)

bring some money

https://www.clublexus.com/forums/gs-...-on-1uzfe.html

OFF TOPIC,also found this while looking, a post about a 500HP Naturally Aspirated GS430

https://www.clublexus.com/forums/car...430-motor.html

vscalais

iTrader: (1)

Back to listing the most cost-effective mods for the GS300 please? Thanks.

speedaddic

iTrader: (10)

read what i posted, then use the search button. There are plenty of parts available, threads available for you to look at. Stop being lazy.

vwynn

iTrader: (4)

if you have a 2jzGE in your GS3... u wont really have much of an option to make it go quick unless you turbo it....

intake Header exhaust... spending $X000... n gain what?? 10whp? 20?

speedaddic

iTrader: (10)

cost effective=turbo...everything else is a waste of money.

Frankdorn

iTrader: (7)

OP isn't listening and doesn't bother searching...this topic's been beaten to death in the past... Can a mod please close the thread?

TLcoats

iTrader: (11)

Totally agree!

99 GS3

iTrader: (14)

If intake and tune is all your looking for the SRT intake/chip combo is all you need. Proven gains, no specialist tuner shop needed, all plug and play for like about $500ish..

There are a ton of threads to search about this intake for more specific info about it, that will all state that this intake system is what works best on an otherwise stock 300.