RichyIS250

i have a fugita intake
took off my resinator
have no cats
have greddy sprectrum exhaust
headers

anyy suggestions wat should i do next ? helpp

Sffd103

iTrader: (16)

you're done buddy! Unless you want to spend 4-5K on a supercharger that only runs 5-8lbs of boost and minimal increase in HP. Maybe 50 MAX. Most people would say to get a 350. Sorry. Invidia or Megan Midpipe? Nitrous is another option.

iRock

iTrader: (12)

Supercharger. Man ur car is loud!

2slixx

iTrader: (3)

You missing midpipes then there is nothing else... unless you go forced induction.

RichyIS250

i have an electric cut out wit a mid-pipe. what kind of supercharger should i get? im not sure wat kind

Kurtz

iTrader: (1)

You shouldn't.

You should sell your car and buy an IS350.

You'll end up with significantly more hp for significantly less money compared to boosting a 250.

The only place boosting a 250 makes any sense is in countries that don't offer the 350.

my95tsi

iTrader: (2)

+1000^^^

I don't get why your modding an IS250 for performance. At the end of the day even with a supercharger anyone in stock IS350 will walk away from you.

Gville350

iTrader: (10)

Either add some juice, or nothing. Boosting is just way to expensive on these cars to see minimal gains.

If you actually do wanna consider boosting the car, try test driving a IS350 first. This might just change your mind!

RichyIS250

ive beaten is350

Kurtz

iTrader: (1)

None that were aware there was a race going on

LamTheSham

iTrader: (8)

^+1 LOL.

10char

kab2103

I have owned a 250 and currently own a 350. There is no way with the mods you have that you would even be close to a 350, if they are paying attention.

ISF4life

iTrader: (30)

Bring it !!!

XhyDra

iTrader: (8)

The only two superchargers worthy of mentioning are the RGM Motorsport supercharger and the ARMA Speed supercharger. Both have proven dyno hp figures that are above IS350 horsepower. If you have money to burn then by all means slap on a supercharger and set the record straight. If not then your only last alternative is to wait for the custom intake and MAPECU3 configuration one of the members in this forum is working on.

If all works out well after all is said and done you can slap on a nitrous kit running a 75 shot, in combination with your current setup and that of the custom intake and piggy back and there might be a chance that you can give an IS350 a run for it's money.

kab2103

How long ago did you get the Tanabe midpipe and where did you get it?