Anyone know this car? 1999 GS300 Turbo
#16
Driver School Candidate
Thread Starter
Join Date: Feb 2003
Location: Alabama
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Ok, yes the car was a repo and I am a dealer. The reason I was trying to get the key from the previous owner was this. I called Lexus and they said because I am a dealer I have to buy a new computer and key for the car, which is $1800. They said if the car belonged to a individual they will give them the computer and only charge for the key, which is ridculous. If it comes to me having to do that I will get around but just seems like a pain.
The name of the valve cover says "Makama". It is also on the headrest. I searched google for Makama GS300 and came up with a few links. Batlground in ATL built the car here is the mod list and link to other pictures. Looks like it was Flordia.
We have finished work on this GS300. Proper Aristo GTE VVTi Swap, Built auto, 67mm Precision Turbo, Giant 15" Rotora Brakes, Blitz Techno Speed Rims, Tein Flex Coil Overs, Custom 3" dual exhaust w/ magnaflow mufflers, Upgraded fuel system w/ Aeromotive FPR and -6 feed and return. Complete top to bottom built car.
http://www.importatlanta.com/forums/...kama-GS300-GTE
The name of the valve cover says "Makama". It is also on the headrest. I searched google for Makama GS300 and came up with a few links. Batlground in ATL built the car here is the mod list and link to other pictures. Looks like it was Flordia.
We have finished work on this GS300. Proper Aristo GTE VVTi Swap, Built auto, 67mm Precision Turbo, Giant 15" Rotora Brakes, Blitz Techno Speed Rims, Tein Flex Coil Overs, Custom 3" dual exhaust w/ magnaflow mufflers, Upgraded fuel system w/ Aeromotive FPR and -6 feed and return. Complete top to bottom built car.
http://www.importatlanta.com/forums/...kama-GS300-GTE
#17
Driver School Candidate
Join Date: Jul 2011
Location: NSW
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
so much money spent on the car and they decide to get a 12year old with a paint can to do the 'artwork' in the engine bay... great find by the looks of this... how much did you pick it up for (going to pick it up for) if you dont mind me asking?
#18
Lead Lap
Join Date: Mar 2011
Location: sOuL-CaLiFoRnIa
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
12yr old car 10-15K+ in mods.................repossession? Was this work done on a store line of credit? Very interesting ordeal. Either way, best of luck to you with your GS.
#19
Lexus Champion
iTrader: (14)
I called Lexus and they said because I am a dealer I have to buy a new computer and key for the car, which is $1800. They said if the car belonged to a individual they will give them the computer and only charge for the key, which is ridculous. If it comes to me having to do that I will get around but just seems like a pain.
Last edited by 99 GS3; 11-04-11 at 07:09 AM.
#20
Pole Position
Join Date: Sep 2004
Location: Missouri
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Check what engine ecu you have like I mentioned. If it's a Non-Immobilizer AristoECU then you can just get some $40 dollar pre-cut keys on ebay and it will start the car. Non need to replace the muli-link transponder ecu that they are talking about, as it's not used anymore.
Ben
#21
Driver School Candidate
Thread Starter
Join Date: Feb 2003
Location: Alabama
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
99 GS3, if you are every in Alabama look me up I'll buy you a whole case of beer. lol.
I took your advice this morning and just went to a locksmith and they cut me a key. Got the battery charged and it fired right up. Car runs great. Thanks again guys.
I took your advice this morning and just went to a locksmith and they cut me a key. Got the battery charged and it fired right up. Car runs great. Thanks again guys.
#22
Instructor
Join Date: Apr 2008
Location: In This Thread
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
Congrats on the car hope all goes well. i agree the car does need some TLC. Do you actually like how the car looks are you going to keep it as is or will you go back to the drawing board?
#23
Lexus Fanatic
iTrader: (182)
contact him and see if he can provide you info on whats in the motor
Custom Tuning By Daniel Willie.
Parts, Fabrication, Race Car Prep
770-319-9605 or batlground@gmail.com
Custom Tuning By Daniel Willie.
Parts, Fabrication, Race Car Prep
770-319-9605 or batlground@gmail.com
#24
Driver School Candidate
Thread Starter
Join Date: Feb 2003
Location: Alabama
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately Batlground worked on one of my Supras about 4 years ago. I won't be using them or contacting them for any reason.
#25
Driver School Candidate
Thread Starter
Join Date: Feb 2003
Location: Alabama
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
BTW, is there any way to open the trunk without the switch inside or the lock outside? My key won't work the outside lock and the button won't pop the trunk?
#27
Instructor
Join Date: Apr 2008
Location: In This Thread
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
I like the wheels on the car. Not a fan of the kit or the dual exhaust. I don't like all the airbrushing under the hood. I will probably paint all that stuff black and try to find stock side and repaint the bumpers and sides and leave the wheels. I actually love the Blitz wheels...always wanted a set for my Supra back in the day.
Unfortunately Batlground worked on one of my Supras about 4 years ago. I won't be using them or contacting them for any reason.
Unfortunately Batlground worked on one of my Supras about 4 years ago. I won't be using them or contacting them for any reason.
Can't wait to see the car when its done.
#29
Former Sponsor
iTrader: (34)
If you're a dealer, all the larger auctions have on-site locksmiths or can refer you to who they use. Become best friends with them...