Takeda SIR review
#31
Lead Lap
iTrader: (6)
DID MY DYNO RUN yesterday, If anything all the intake did was gave a +10 ft lb torque.
I came out with 174hp and 185ft lb tq consistent on 2 pulls...I feel like i could have made a little more but the tuner didn't want to push it.
I'm running the Takeda with just a Greddy Elite exhaust
I came out with 174hp and 185ft lb tq consistent on 2 pulls...I feel like i could have made a little more but the tuner didn't want to push it.
I'm running the Takeda with just a Greddy Elite exhaust
#32
Lexus Champion
iTrader: (17)
I think thats correct ^
I hope Ryan doesnt mind me sharing my dyno run
I got 160ish whp on my first run for some reason but 176.8 whp and 186 ft/lbs of torque on my second run.
I got 2-3 more whp than Ryan only because of my midpipe.
Anyone know how much whp a stock IS250 has so we can see exactly how much gain there is from the Takeda?
I hope Ryan doesnt mind me sharing my dyno run
I got 160ish whp on my first run for some reason but 176.8 whp and 186 ft/lbs of torque on my second run.
I got 2-3 more whp than Ryan only because of my midpipe.
Anyone know how much whp a stock IS250 has so we can see exactly how much gain there is from the Takeda?
Last edited by bob4256; 10-23-12 at 03:48 PM.
#36
kind of hard to tell a 5hp difference, you'd have to do a bunch of pulls stock on a dyno and then on the same dyno do it again a bunch of times with the intake changed out to really do a comparison.
#37
Tech Info Resource
iTrader: (2)
Trap speed never lies. Dynos lie everyday.
Besides, I've never seen anyone drive very long with their hood open, so dyno test results are always something to take with a grain of salt.
Besides, I've never seen anyone drive very long with their hood open, so dyno test results are always something to take with a grain of salt.
#40
Lexus Champion
iTrader: (2)
not 100% accurate but about 15% loss for rwd and 20% loss for awd lol
------------------------------------------------------
Anyways, is it possible to buy a Takeda/AFE filter and put it on my K&N intake pipe? I'm so tired of the oiling and being nervous about messing up my MAF lol not to mention I searched for some comparison the AFE Dry Pro filters better than K&N as well..
I found one "Takeda" intake replacement filter that's same dimension as my K&N one but not sure if I want to pull the trigger ($50)
Honestly I'm too lazy to sell my intake and buy a new one lol
------------------------------------------------------
Anyways, is it possible to buy a Takeda/AFE filter and put it on my K&N intake pipe? I'm so tired of the oiling and being nervous about messing up my MAF lol not to mention I searched for some comparison the AFE Dry Pro filters better than K&N as well..
I found one "Takeda" intake replacement filter that's same dimension as my K&N one but not sure if I want to pull the trigger ($50)
Honestly I'm too lazy to sell my intake and buy a new one lol
Thread
Thread Starter
Forum
Replies
Last Post