IS300 CD009 350z Transmission Swap
#16
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
#17
Driver School Candidate
Join Date: Nov 2011
Location: CO
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Oh ok I'm sorry. I thought it was a design for building a completely new shifting mechanism from the ground up. Still hard for me to visualize the end result but I'll just sit patiently and await the end result like everyone else lol. Hoping your design will work on an SC as well.
#18
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Oh ok I'm sorry. I thought it was a design for building a completely new shifting mechanism from the ground up. Still hard for me to visualize the end result but I'll just sit patiently and await the end result like everyone else lol. Hoping your design will work on an SC as well.
Im really hoping this tranny fits between this lexus cause it sure as hell doesn't look like it will, my friends think it will so we will see.
Same but different..........
#19
Driver School Candidate
Join Date: Apr 2006
Location: Woodridge, IL
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Can you have Collins build 2? I have been talking to Brett over there as well. I'm glad you're a little further along than I am. I have yanked my w58 (which replaced my w55), so if you need measurements, I can take them for you.
#21
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
On a side note, I was doing some regular maintenance stuff to carry this motor over till the built motor is complete and idk wtf lexus was thinking putting the throttle body on top of the spark plugs. Thats a fail all day every day all the time. Such a disapointment to see that ! 2 hours to change spark plugs gtfo. If the tranny fits then the first thing im going to buy is aem dezod pnp and a intake manifold that will let me check my plugs.
Last edited by airfed; 02-18-13 at 10:46 AM.
#23
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. The adapter plate is set for delivery either today or tommorow, so im setting up a test fit party for saturday morning.
Widest section, starting around 9" eventaually getting to 10" mid ways down.
Measuring right at 11" - 11.5 in this area.
Fit baby fit.
Widest section, starting around 9" eventaually getting to 10" mid ways down.
Measuring right at 11" - 11.5 in this area.
Fit baby fit.
#27
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Bracket is in. Looks to be carbon steel with some sort of coating or paint to prevent corrosion and rust. Should be the last thing standing when this car is expired haha. Not sure if I got all the bolts cause the bolt baggy open and box had holes from poor shipping and handling. Either way this should be enough for the fitting so its going down saturday morning.
#29
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Hell yea! Thanks. I'm a tuner so I always go for plug and play but I can swing a few wires with that diagram you made.
https://www.clublexus.com/forums/per...play-what.html