Magnaflow Is 250 F sport Exhuast
#1
Driver
Thread Starter
Join Date: Jul 2013
Location: NY
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Magnaflow Is 250 F sport Exhuast
Just recieved my axle back kit diredt from magnaflow for testing purposes...I will post up instal pics and sound clips and video after I get home from work. They sent it to me but as you know it is not out yet so I will be doing some fit testing for them etc....Hopefully everything goes smooth....talk to you guys soon
#2
Lexus Test Driver
iTrader: (2)
Just recieved my axle back kit diredt from magnaflow for testing purposes...I will post up instal pics and sound clips and video after I get home from work. They sent it to me but as you know it is not out yet so I will be doing some fit testing for them etc....Hopefully everything goes smooth....talk to you guys soon
#3
Driver
Thread Starter
Join Date: Jul 2013
Location: NY
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Magnaflow released the 350 exhaust not yet for the 250 from what I understand ....in any event I will post up instal pics etc
#5
Driver
Thread Starter
Join Date: Jul 2013
Location: NY
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
#7
The pursuit of F
^^^^ Agree, since the stock exhaust is identical on the 250 and 350 any aftermarket exhaust for the IS will fit for the 250/350 including AWD/RWD. T
However, when I got mine custom built, my exhaust specialist did not want to put 2.5 inch tubing on a 2.5L V6 204 hp engine which the Magnaflow bolt-on axle-back comes with. (Stock is 1.75") Reason is after a certain increase in diameter, you lose the optimal balance of backpressure and free-flow gas which can result in a loss in idle torque. On my 250, he said 2.25" tubing would be optimal for the car's engine output. So the 2.5" axle-back from Magnaflow will physically fit on the 250 but there's a small risk you may lose a couple ft-lb torque on take-off.
FSportlex, please post feedback on the kit. Is it with the same 2.5" tubing for the 250? How does it sound? And how does the power feel?
However, when I got mine custom built, my exhaust specialist did not want to put 2.5 inch tubing on a 2.5L V6 204 hp engine which the Magnaflow bolt-on axle-back comes with. (Stock is 1.75") Reason is after a certain increase in diameter, you lose the optimal balance of backpressure and free-flow gas which can result in a loss in idle torque. On my 250, he said 2.25" tubing would be optimal for the car's engine output. So the 2.5" axle-back from Magnaflow will physically fit on the 250 but there's a small risk you may lose a couple ft-lb torque on take-off.
FSportlex, please post feedback on the kit. Is it with the same 2.5" tubing for the 250? How does it sound? And how does the power feel?
Trending Topics
#8
Driver
Thread Starter
Join Date: Jul 2013
Location: NY
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
So I installed it with no issues so it does fit and as for the torque goes and losing power it honestly feels the same I'm not going to dyno it but boy does it sound sweet .....and it most likely is 2.5 if I remember correctly .....I will post sounds and video by tomorrow
#12
Driver
Thread Starter
Join Date: Jul 2013
Location: NY
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
#14
Driver
Thread Starter
Join Date: Jul 2013
Location: NY
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts