help with wish list for GE turbo upgrade!!!!
#1
Rookie
Thread Starter
help with wish list for GE turbo upgrade!!!!
after doing some research iv compiled a list. this is what i got. please if anyone could help with anything else or anything i don't need. you would be awesome. and i would just all around appreciate it.
T57 / .82 hotside
stainless manifold
wastegate / dumptube
downpipe
FMIC
IC piping
BOV
Emanage/Wiring Harness
660CC Injectors
Fuel Pressure Regulator
Turbo Blanket
Upper intercooler pipe
Air Filter
AEM Wideband
Boost Gauge
Oil Feed
Oil Return
Misc Clamps / Couplers \
Misc Wiring / Hose / Fittings
Heat Shield x 2
MAP Sensor/pigtail
2jz-gte pistons / rods
OEM rings
OEM Headgasket
Clevite Tri-metal bearings
Hone, surface, clean, check
ARP Head studs
Gates Timing Belt
Break in Oil, Filter, Coolant
Toyota FIPG
O-rings, Seals, Gaskets
T57 / .82 hotside
stainless manifold
wastegate / dumptube
downpipe
FMIC
IC piping
BOV
Emanage/Wiring Harness
660CC Injectors
Fuel Pressure Regulator
Turbo Blanket
Upper intercooler pipe
Air Filter
AEM Wideband
Boost Gauge
Oil Feed
Oil Return
Misc Clamps / Couplers \
Misc Wiring / Hose / Fittings
Heat Shield x 2
MAP Sensor/pigtail
2jz-gte pistons / rods
OEM rings
OEM Headgasket
Clevite Tri-metal bearings
Hone, surface, clean, check
ARP Head studs
Gates Timing Belt
Break in Oil, Filter, Coolant
Toyota FIPG
O-rings, Seals, Gaskets
#3
Pole Position
iTrader: (6)
Seems like your on the right track. What are your hp goals. Here was my set up.
GTE Internals.
GTE headgasket
Boost controller
AF wideband
arp headstuds
bm trans cooler
turbonectic 60-1 turbo
turbonetic wg
turbonectics log mani
550 cc injectors
walboro fuel pump
aem fic
You can get get custom piping done or piece together piping along with fmic. As far as your emanage. Are you doing the install/tuning yourself? if not I would talk to your tuning/builder and see what they are comfortable with tuning.
GTE Internals.
GTE headgasket
Boost controller
AF wideband
arp headstuds
bm trans cooler
turbonectic 60-1 turbo
turbonetic wg
turbonectics log mani
550 cc injectors
walboro fuel pump
aem fic
You can get get custom piping done or piece together piping along with fmic. As far as your emanage. Are you doing the install/tuning yourself? if not I would talk to your tuning/builder and see what they are comfortable with tuning.
#4
Rookie
Thread Starter
Well I'm looking for about. 400+ at least it's the plan. Im going thru a shop. And the one last question I would have is that would all tis work with the auto transmission.
#6
Rookie
Thread Starter
Trending Topics
#9
Rookie
Thread Starter
#11
Rookie
Thread Starter
but 6266 and 6466 if not so expensive > the ******
are you happy with the 6765? would you recommend? any information would be awesome. thank you for your help
#15
Rookie
Thread Starter