When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is what you do after you hook up the intake. Unplug your battery terminals (both positive and neg) for 30min-1hour, Clean the maf sensor and inside of the throttle body (just where the open is located) and then after you do all of that, put every thing back together and give it another rub, that baby should turn without a problem. (From my experience when I had the same intake)
This is what you do after you hook up the intake. Unplug your battery terminals (both positive and neg) for 30min-1hour, Clean the maf sensor and inside of the throttle body (just where the open is located) and then after you do all of that, put every thing back together and give it another rub, that baby should turn without a problem. (From my experience when I had the same intake)
I tried it today abd idk wht the problem is now. What do you mean my give it Another rub? Also I put on the old intake cause I got mad lol and it started up fine no bucking (engine shaking) and it worked then I put back on the weapon r and started bucking again. I ddi realize doe that the intake isnt pulling air unless I press the gas
yea bro I actually got it fixed but now my car is doing sumtin totally different when I pull off it hesitates to go and when im driving abs I press on the gas it hesitates and I heard back fire from the intake a couple times
03-18-14, 07:38 AM
