When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think these are the hard parts to get. I wish someone could come up with some drawings to have them made yourself or sell the custom pieces. Then you could buy the other parts (supercharger, intercooler, etc) from various locations and have a kit.
But as you can see, this stuff isn't cheap either:
Like i told you! i have the mounting bracket done and going to machine it this weekend!
can make one for you for cheap!
all you need to do is to find the crank pulley! i have one, i will talk to the machinist, if he can make 1 more!!!
and rest that you need is the Rotrex C30-94 (2000$) and just piping and intercooler! its cheap... :P
BTW rotrex C38 will blow your engine!
Like i told you! i have the mounting bracket done and going to machine it this weekend!
can make one for you for cheap!
all you need to do is to find the crank pulley! i have one, i will talk to the machinist, if he can make 1 more!!!
and rest that you need is the Rotrex C30-94 (2000$) and just piping and intercooler! its cheap... :P
BTW rotrex C38 will blow your engine!
I've been in contact with ARMA and finally got them to send me a parts list. They will part out their kit but you lose the 3yr warranty. I've translated the list and now am figuring out which parts I need and then I will email them back for a price.
Here is a picture of the mounting bracket and supercharger. They use a C38-92 with a 95mm drive pulley? The mounting bracket comes with the crank pulley?
There are 41 parts in the kit. There are several custom brackets to hold intake pipe holder, intake manifold bracket, tank rack holder that might be useful but any good shop can make some brackets.
I've been in contact with ARMA and finally got them to send me a parts list. They will part out their kit but you lose the 3yr warranty. I've translated the list and now am figuring out which parts I need and then I will email them back for a price.
Here is a picture of the mounting bracket and supercharger. They use a C38-92 with a 95mm drive pulley? The mounting bracket comes with the crank pulley?
There are 41 parts in the kit. There are several custom brackets to hold intake pipe holder, intake manifold bracket, tank rack holder that might be useful but any good shop can make some brackets.
This pipe confuses me? For the blow off return?
Hmm did it come out to be cheaper as a part-by-part buy? I don't think that pipe's a bov though btw