When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I’m running an injen intake and invidia mid pipe, otherwise stock.. I found that the car ran .2 sec fast in auto vs using the paddles .. I too ran 40psi of tire pressure in my first run and experienced wheel hop. I dropped it to 32psi and I got better results.
Thats a pretty nice run for a car with few mods like yours i'm sure mine can get 9 flat with lower tire pressure and better reaction time, also lower temps i ran at 83 F second run and the line was pretty long like we all know our car its very sensitive to IAT. lets see what happens next time i'm gonna go earlier to see if i can get a few more runs!
Nice! With TTI stage 2 we are only 2 PSI over stock, so lets see what 2+ does.
BMS can be adjusted to +5 PSI. When i ran mine on the dyno i had it set on +4PSI, but that was on a bone stock motor.
as you know i've got your bms unit now. did you leave set at 4 when you sold it?
PPE catted downpipe straight pipe. Security flew around the corner lol
Sounds kind of like mine when i had the de catted downpipe and straight pipe idk if yours drones but i got tired of it plus its a lexus so you dont want it to sound too loud or graspy. Thats why i got the circuit werks axleback from 1 to 10 in loudness i would say my car now its a 7.5 sounds good and it feels better. you should have at least a couple small mufflers.
Sounds kind of like mine when i had the de catted downpipe and straight pipe idk if yours drones but i got tired of it plus its a lexus so you dont want it to sound too loud or graspy. Thats why i got the circuit werks axleback from 1 to 10 in loudness i would say my car now its a 7.5 sounds good and it feels better. you should have at least a couple small mufflers.
Yeah, no I like the backfire sound and I'm not the only one. I see straight piped everything out here i think its more of a difference of opinion. Either way Idk if you remember but i installed a valved exhaust so i can switch from oem to straight pipe. Also technically the only way to get that kind of backfire is by installing a bov after the stock bov or by completely replacing the stock bov. basically the same as the wrx sti
Got confirmation that the AFE Scorcher piggyback system in the “Race mode” setting is +4 PSI over stock! If you guys sign up for their newsletter you can also get 10% off making it around $377 shipped. If you add a downpipe with this piggyback system you will see some awesome gains. I posted the link and information on the first page of this thread.
Got confirmation that the AFE Scorcher piggyback system in the “Race mode” setting is +4 PSI over stock! If you guys sign up for their newsletter you can also get 10% off making it around $377 shipped. If you add a downpipe with this piggyback system you will see some awesome gains. I posted the link and information on the first page of this thread.
10-17-17, 04:57 AM
