IS200t tune
#3526
#3527
Lexus Champion
Thread Starter
These guys in Taiwan are still working with their hybrid turbo.
The following users liked this post:
imyang (01-04-19)
#3530
Driver School Candidate
Join Date: Mar 2017
Location: Singapore
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
#3531
#3532
#3533
Lexus Champion
Thread Starter
I sold a BMS box to that NX200t owner and it worked perfectly. The RX200t should be fine as well.
#3534
Lexus Champion
Thread Starter
Found a great deal on the AEM intake system on Amazon. They have 7 in stock!
#3535
#3536
Pole Position
Original air box is used so yes you can retain the OEM air filter (however most AEM filters are now dry so no MAF issues). Gains are likely minimal just like the HPS "intake".
#3537
Lexus Champion
Thread Starter
I attached their dyno results. This could be just for marketing purposes but i do think that this intake will flow a lot better than stock and looks great.
https://www.aemintakes.com/search/pr...x?prod=22-692C
https://www.aemintakes.com/search/pr...x?prod=22-692C
Last edited by Sheddy; 01-10-19 at 07:15 AM.
#3538
Driver School Candidate
Early next year will be our release. And we will be implementing our custom EROM patching to this ECU.
It completely changes ...everything about tuning this car. As we now have control to customize and change actual tables in the ECU to do what we want, how we want, etc.
For example in the Tacoma we really didn't like how the ignition control is setup, so we created our own ignition table for the ECU to follow. as seen below.
It completely changes ...everything about tuning this car. As we now have control to customize and change actual tables in the ECU to do what we want, how we want, etc.
For example in the Tacoma we really didn't like how the ignition control is setup, so we created our own ignition table for the ECU to follow. as seen below.
Excuse me sir, I believe we were promised updates after Christmas!!???
Excited to hear how it's going!
#3540
Pole Position
I attached their dyno results. This could be just for marketing purposes but i do think that this intake will flow a lot better than stock and looks great.
https://www.aemintakes.com/search/pr...x?prod=22-692C
https://www.aemintakes.com/search/pr...x?prod=22-692C