IS200t tune
03-13-19, 01:27 AM
#3676
Driver School Candidate
Join Date: Mar 2017
Location: Singapore
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Flashing is simple, painless and takes less than 2 minutes.
Our software also allows you to do a full readout (about 15 minutes) of the stock ECU before flashing if you would like to. (on New ROMs for support, new ECU IDs, this is required.)
For any ECU ID that is yet to be built and patched, you'll need to dump the ECU details and stock ROM. Again, 1 button, super easy.
We are currently cleaning up a few code paths for throttle control in the higher gears (6-8).
Thank you to everyone who pre-ordered. Note, Pre-order pricing ends March 15th. And at the rate of how quickly we run out of cables, ordering after the 15th there will be a delay in shipments (generally + 1 week).
We've also got several requests of patching the ignition to create the exhaust burble / popping. This can be done.
Right now we are working with a IS200T in Asia to patch the final high gear throttle code to ensure these tunes are solid for cars in the USA and outside the USA.
NX200T is also supported. Transmission tuning is slightly different however Engine tuning is the same.
There are something that we will be working on in our 1.02 patch as well, including > Shift pattern simplification
We can set the ECU up to always use a single shift pattern (for example car starts in Sport mode.. etc).
I appreciate everyone's patience. The demand right now is very high. We are going as fast as possible to get back to everyone.
I am a bit confused why someone would want to purchase with the intention of not using it.
Our software also allows you to do a full readout (about 15 minutes) of the stock ECU before flashing if you would like to. (on New ROMs for support, new ECU IDs, this is required.)
For any ECU ID that is yet to be built and patched, you'll need to dump the ECU details and stock ROM. Again, 1 button, super easy.
We are currently cleaning up a few code paths for throttle control in the higher gears (6-8).
Thank you to everyone who pre-ordered. Note, Pre-order pricing ends March 15th. And at the rate of how quickly we run out of cables, ordering after the 15th there will be a delay in shipments (generally + 1 week).
We've also got several requests of patching the ignition to create the exhaust burble / popping. This can be done.
Right now we are working with a IS200T in Asia to patch the final high gear throttle code to ensure these tunes are solid for cars in the USA and outside the USA.
NX200T is also supported. Transmission tuning is slightly different however Engine tuning is the same.
There are something that we will be working on in our 1.02 patch as well, including > Shift pattern simplification
We can set the ECU up to always use a single shift pattern (for example car starts in Sport mode.. etc).
I appreciate everyone's patience. The demand right now is very high. We are going as fast as possible to get back to everyone.
I am a bit confused why someone would want to purchase with the intention of not using it.
I'm a bit new to flashing and would like to know what would happen if the ECU bricks during the flashing process? What is the recovery process like?
03-13-19, 05:53 AM
#3677
If the flash fails, for any reason, you unplug it, etc. Just flash again and you're all set.
03-15-19, 05:56 AM
#3679
Hello,
Thank you everyone who has pre-ordered. The final day for tune pre-order is today.
Our standard kit price is $679
We are working on finalizing a EROM update and then all the tickets (pending emails / zendesk tickets) to our current customers requesting an update will be updated this weekend.
Thank you everyone who has pre-ordered. The final day for tune pre-order is today.
Our standard kit price is $679
We are working on finalizing a EROM update and then all the tickets (pending emails / zendesk tickets) to our current customers requesting an update will be updated this weekend.
03-15-19, 09:02 AM
#3680
Will you guys really be shipping today for the people who pre-ordered? I will be dynoing my car tomorrow for baseline numbers. I'd like my is200t to run 14s in the 1/4 mile for my bday next week 
. I'll dyno again after the tune.
. I'll dyno again after the tune.
The following users liked this post:
imyang (03-15-19)
03-15-19, 02:28 PM
#3681
Note, a slight update to our website, the kit is now located under Toyota Tuning
03-17-19, 04:19 AM
#3686
Driver School Candidate
Join Date: Mar 2017
Location: Singapore
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
03-17-19, 01:55 PM
#3688
03-18-19, 06:49 AM
#3689
Our V3 Cables are arriving to us a day later than expected, so pre-orders will receive tracking info either this afternoon or tomorrow morning.
Pre-order pricing is over. Thank you everyone.
Now we are working on getting kits out to everyone!
I think you guys will really really enjoy this new tune.
We will also be offering some levels of customization for cars that need it.
One thing we want to mention, is that there are several versions of the IS200T ECU (by ID)
So, when you receive your kit and software first thing we need done is a readout of the ECU and sent to us.
For everyone who has ordered, we will send you our setup instructions
You can setup ahead of time so that when the cable arrives you're good to read the ecu right away
Pre-order pricing is over. Thank you everyone.
Now we are working on getting kits out to everyone!
I think you guys will really really enjoy this new tune.
We will also be offering some levels of customization for cars that need it.
One thing we want to mention, is that there are several versions of the IS200T ECU (by ID)
So, when you receive your kit and software first thing we need done is a readout of the ECU and sent to us.
For everyone who has ordered, we will send you our setup instructions
You can setup ahead of time so that when the cable arrives you're good to read the ecu right away
The following users liked this post:
WhyHateTho (03-18-19)
The following users liked this post:
imyang (03-18-19)