IS200t tune
#4771
Racer
iTrader: (1)
2. These extra long sockets for the t-bolt clamps, especially the one that connects to the intercooler:
3. OEM hose clamp pliers, or at least one of them and definitely the U-shaped pick tool to help pry the oem intercooler hose off of the piping.
4. Various ratchets and accessories, both 1/4 and 3/8 with extensions, swivels and different length sockets in 10mm, 12mm and smaller for any hose clamps.
5. Forearm protectors to avoid scratches when working on the back of the engine (think of a long sleeve Under Armour compression shirt with the forearm section cut out).
6. Zip ties for securing things that the aftermarket pipe doesn't account for (such as the 02 sensor harness).
Last edited by BMGS; 04-29-22 at 10:15 AM.
#4772
Intermediate
1. A good headlamp flashlight
2. These extra long sockets for the t-bolt clamps, especially the one that connects to the intercooler: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
3. OEM hose clamp pliers, or at least one of them and definitely the U-shaped pick tool to help pry the oem intercooler hose off of the piping.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
4. Various ratchets and accessories, both 1/4 and 3/8 with extensions, swivels and different length sockets in 10mm, 12mm and smaller for any hose clamps.
5. Forearm protectors to avoid scratches when working on the back of the engine (think of a long sleeve Under Armour compression shirt with the forearm section cut out).
6. Zip ties for securing things that the aftermarket pipe doesn't account for (such as the 02 sensor harness).
2. These extra long sockets for the t-bolt clamps, especially the one that connects to the intercooler: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
3. OEM hose clamp pliers, or at least one of them and definitely the U-shaped pick tool to help pry the oem intercooler hose off of the piping.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
4. Various ratchets and accessories, both 1/4 and 3/8 with extensions, swivels and different length sockets in 10mm, 12mm and smaller for any hose clamps.
5. Forearm protectors to avoid scratches when working on the back of the engine (think of a long sleeve Under Armour compression shirt with the forearm section cut out).
6. Zip ties for securing things that the aftermarket pipe doesn't account for (such as the 02 sensor harness).
Probably best way to go is get the coupler for the intercooler on first and secured in place, then you can install the charge pipe a bit more easily since that coupler will be there to hold it in place while you adjust the positioning, also have the outlet elbow off the turbo loosened a bit so you have some room to adjust parts as required
If your charge pipe doesn't come with a bracket to secure the upper O2 sensor cable and the hose coming off the brake booster, I'd just cut the bracket off the stock pipe and use that
The following users liked this post:
zhifan1 (04-29-22)
#4773
Racer
iTrader: (1)
After doing my install, I would say the order of install for couplers really matters as well
Probably best way to go is get the coupler for the intercooler on first and secured in place, then you can install the charge pipe a bit more easily since that coupler will be there to hold it in place while you adjust the positioning, also have the outlet elbow off the turbo loosened a bit so you have some room to adjust parts as required
If your charge pipe doesn't come with a bracket to secure the upper O2 sensor cable and the hose coming off the brake booster, I'd just cut the bracket off the stock pipe and use that
Probably best way to go is get the coupler for the intercooler on first and secured in place, then you can install the charge pipe a bit more easily since that coupler will be there to hold it in place while you adjust the positioning, also have the outlet elbow off the turbo loosened a bit so you have some room to adjust parts as required
If your charge pipe doesn't come with a bracket to secure the upper O2 sensor cable and the hose coming off the brake booster, I'd just cut the bracket off the stock pipe and use that
#4774
Here's another option, you can register a 3 day Techstream subscription for ~$30 $65 from Toyota/Lexus.
From the Techstream online portal, you can download the stock tune (engine, trans, & various modules) for your car, direct from the manufacturer/source. It will be a file you can keep permanently and forever, and give you the option to flash back whenever.
It's how I recovered from being locked into OVTune, since I didnt buy into VFTuner.
It will also give access to the Techstream software & full repair manual/torque specs (however long your subscription is lol).
I have mine saved from there and various other cars as well.
Totally worth$30 $65 for peace of mind, in your situation.
Keep the Techstream software saved/installed, after the subscription ends, the license will expire and lock you out.
However you can use the CUW.exe (Calibration Update Wizard), without a license; have to launch it direct from install location.
That will give you the opportunity to flash to stock whenever (Toyota/Lexus files only).
Just note that Toyota/Lexus only provides the latest cal, which incorporates changes/recalls.
Here is when i updated my car:
Engine ECU 8300 -> 8700
Trans ECU 8300 -> 8400
From the Techstream online portal, you can download the stock tune (engine, trans, & various modules) for your car, direct from the manufacturer/source. It will be a file you can keep permanently and forever, and give you the option to flash back whenever.
It's how I recovered from being locked into OVTune, since I didnt buy into VFTuner.
It will also give access to the Techstream software & full repair manual/torque specs (however long your subscription is lol).
I have mine saved from there and various other cars as well.
Totally worth
Keep the Techstream software saved/installed, after the subscription ends, the license will expire and lock you out.
However you can use the CUW.exe (Calibration Update Wizard), without a license; have to launch it direct from install location.
That will give you the opportunity to flash to stock whenever (Toyota/Lexus files only).
Just note that Toyota/Lexus only provides the latest cal, which incorporates changes/recalls.
Here is when i updated my car:
Engine ECU 8300 -> 8700
Trans ECU 8300 -> 8400
I have lexus is200t 2016 with engine 8ar-fts...
I told the dealer that there's an update for the ECU.... They told me NOoOoOOOoOoO.... We will contact the manufacturer..... After a day they call me back and they told me no we don't have any calibration for is200t ECU in our region....
They told me this is applicable only into the United States 🤔
I told them this update is for calibration of Engine and transmission.... Not matter which region...
Please let me know if you have anything that can help me to get this done the new calibration....
Thank you for reading this
#4775
This is interesting, would be good to know as well. Also, is there any perceptible difference with the new ECU and TCU updates?
Is this applicable to all over the world or only in the United States??
I have lexus is200t 2016 with engine 8ar-fts...
I told the dealer that there's an update for the ECU.... They told me NOoOoOOOoOoO.... We will contact the manufacturer..... After a day they call me back and they told me no we don't have any calibration for is200t ECU in our region....
They told me this is applicable only into the United States 🤔
I told them this update is for calibration of Engine and transmission.... Not matter which region...
Please let me know if you have anything that can help me to get this done the new calibration....
Thank you for reading this
I have lexus is200t 2016 with engine 8ar-fts...
I told the dealer that there's an update for the ECU.... They told me NOoOoOOOoOoO.... We will contact the manufacturer..... After a day they call me back and they told me no we don't have any calibration for is200t ECU in our region....
They told me this is applicable only into the United States 🤔
I told them this update is for calibration of Engine and transmission.... Not matter which region...
Please let me know if you have anything that can help me to get this done the new calibration....
Thank you for reading this
#4778
They do ship to california. I went ahead and sent them a message a couple of months back because i saw it said they didn’t. then my buddy got it for his 350. supposedly they just market that they don’t sell it to california residents. recently bought mine 2 days ago.
#4782
#4783
Goodbye
After 5 years on this platform and speaking to many tuners and Lexus/Toyota engineers, I have officially sold the IS200t. These cars seemed to have a lot of potential when they came out, however, everyone that attempts to tune/mod these cars cannot get real power out of it. I ran a OrangeVirus tune with custom exhaust. While it did improve acceleration and turbo lag, the car was still terribly slow. I’ll keep the videos up on my Instagram for whoever wants to see. I never thought I’d be saying this, but I traded the Lex for a G82 M4 Competition. Best of luck to everyone. If interested, follow for the M4 Build.
instagram: itsaturbo
instagram: itsaturbo