Performance Forced induction, intakes, exhausts, torque converters, transmissions, etc.

Help!

Thread Tools
 
Search this Thread
 
Old 02-27-18, 10:30 PM
  #1  
Obie
Driver School Candidate
Thread Starter
 
Obie's Avatar
 
Join Date: Feb 2018
Location: Roseville Ca.
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Help!

I bought an 01 gs300. Car would run, but no throttle. 4 codes came up, throttle motor malfunction, Tod, and pedal sensor. I found another good throttle body on eBay, and just changed the whole thing. I've changed the crank sensor, the cam sensor, fuel pump, timing belt, blah blah. The car is in really good shape. Anyway, the car will start, pedal is working now, no codes, but will start to miss, and die after about 4 or 5 min. and will not start again. If I pull the battery cable off wait a few min, it will start, idle fine, and dies again within a few min. Oh, and when it's idling, if I step on the pedal, it hesitates, and starts popping through the intake. Timing is dead nuts. I don't know what the hell is wrong with it! It acts like it's in a limp mode? Anyone have a clue as to what's going on??
Obie is offline  
Old 02-28-18, 07:52 AM
  #2  
Letsride
Moderator
 
Letsride's Avatar
 
Join Date: Oct 2002
Location: North Carolina
Posts: 4,389
Received 52 Likes on 46 Posts
Default

No need to keep starting threads about this.!
Letsride is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EMCM
Performance
15
09-10-21 04:31 PM
Obie
Performance
19
08-29-21 05:08 PM
Michael88
LS - 1st and 2nd Gen (1990-2000)
19
10-17-18 07:12 AM
Lexingram
ES - 1st to 4th Gen (1990-2006)
1
07-18-14 06:01 PM



Quick Reply: Help!



All times are GMT -7. The time now is 03:20 AM.