Intercooler and piping options
#1
Driver School Candidate
Thread Starter
Intercooler and piping options
Hey guys new to the site. I own a 2003 GS300 that I知 about to swap. I already have the motor/transmission and just about everything else I need to do it. The one thing I need is a front mount intercooler. What options are there for a quality intercooler and what piping is everyone using? Can you make it work with a universal pipe kit or is custom a must? I値l be using the stock twins for now and upgrade later. I知 leaning towards a Treadstone intercooler if anyone has fit one.
#3
Lead Lap
iTrader: (1)
I'm running a treadstone and im happy with it. i believe its three inches thick and has the cast end tanks that has the airflow dividers built in to help direct airflow up thru the upper portion of the intercooler. I have an air intake temp gauge which is a thermocouple and the intake temps hold pretty steady. but im also spraying boost juice on boost.
#4
Driver School Candidate
Thread Starter
I'm running a treadstone and im happy with it. i believe its three inches thick and has the cast end tanks that has the airflow dividers built in to help direct airflow up thru the upper portion of the intercooler. I have an air intake temp gauge which is a thermocouple and the intake temps hold pretty steady. but im also spraying boost juice on boost.
Thread
Thread Starter
Forum
Replies
Last Post
JeffTsai
2Gen GS430 / 400/ 300 Classifieds (98-05)
1
08-28-09 09:33 AM
motorheaddown
SC400 / 300 Classifieds
4
06-27-05 06:37 PM