Performance Forced induction, intakes, exhausts, torque converters, transmissions, etc.

200t Road to Stage 2 plus

Thread Tools
 
Search this Thread
 
Old 09-24-20 | 06:43 PM
  #16  
DarthLex's Avatar
DarthLex
Pit Crew
 
Joined: Oct 2013
Posts: 164
Likes: 5
From: Texas
Default

Originally Posted by timghetta
HPS Charge Pipe installed


How does it feel overall with the charge pipe? I’m guessing you have the intake as well.
Old 09-24-20 | 08:57 PM
  #17  
timghetta's Avatar
timghetta
Thread Starter
Driver
 
Joined: Apr 2004
Posts: 132
Likes: 47
From: Florida
Default

I have the HPS Silicon Intake w/ FSport Filter in stock air box along with the TTI Motorsports Stage 2 plus w/ TCU tune.
Of course the charge pipe, then past the turbo I have Downpipe (non cat), mid pipe, and the axle back exhaust by Inivida. The last thing on my list is the muffle delete and diverter valve and I will leave it as is.

It's ridiculously loud but it has a nice little pull on it. Nothing like my old SC300 with 1JZ and Big turbo setup, but definitely more ***** and fun to drive. Combined with it lowered on Tein Flex Z Coilovers and RCF/GSF big brakes.
On the exhaust it seems the loudest around 2200 - 2800 RPM and as it goes higher it seems the exhaust isn't as loud anymore, with a nice tone.
The following users liked this post:
DarthLex (09-26-20)
Old 09-27-20 | 11:36 AM
  #18  
NikNikNik's Avatar
NikNikNik
Pole Position
 
Joined: Apr 2019
Posts: 219
Likes: 90
From: Texas
Default

wow you put in some big money into your car
Old 09-27-20 | 01:55 PM
  #19  
DarthLex's Avatar
DarthLex
Pit Crew
 
Joined: Oct 2013
Posts: 164
Likes: 5
From: Texas
Default

Originally Posted by timghetta
I have the HPS Silicon Intake w/ FSport Filter in stock air box along with the TTI Motorsports Stage 2 plus w/ TCU tune.
Of course the charge pipe, then past the turbo I have Downpipe (non cat), mid pipe, and the axle back exhaust by Inivida. The last thing on my list is the muffle delete and diverter valve and I will leave it as is.

It's ridiculously loud but it has a nice little pull on it. Nothing like my old SC300 with 1JZ and Big turbo setup, but definitely more ***** and fun to drive. Combined with it lowered on Tein Flex Z Coilovers and RCF/GSF big brakes.
On the exhaust it seems the loudest around 2200 - 2800 RPM and as it goes higher it seems the exhaust isn't as loud anymore, with a nice tone.
Can we get a sound clip🤔?

Old 09-27-20 | 02:12 PM
  #20  
timghetta's Avatar
timghetta
Thread Starter
Driver
 
Joined: Apr 2004
Posts: 132
Likes: 47
From: Florida
Default

Originally Posted by DarthLex
Can we get a sound clip🤔?
I'll see what i can do.
Old 11-04-20 | 12:46 PM
  #21  
timghetta's Avatar
timghetta
Thread Starter
Driver
 
Joined: Apr 2004
Posts: 132
Likes: 47
From: Florida
Default

Originally Posted by DarthLex
Can we get a sound clip🤔?
Here you go, sorry took so long to get it.
and
Of course the phone doesn't sound as loud as it is in person.
Old 11-16-20 | 05:19 PM
  #22  
timghetta's Avatar
timghetta
Thread Starter
Driver
 
Joined: Apr 2004
Posts: 132
Likes: 47
From: Florida
Default

I titanium sleeved the breather hoses over the turbo and just waiting for TTI to start selling the MDK and DVS then that's it, unless a turbo comes out. I might do a HKS Super Power Flow filter.




Last edited by timghetta; 11-16-20 at 07:03 PM.
Old 11-23-20 | 07:53 PM
  #23  
DarthLex's Avatar
DarthLex
Pit Crew
 
Joined: Oct 2013
Posts: 164
Likes: 5
From: Texas
Default

Originally Posted by timghetta
Here you go, sorry took so long to get it.
Dyno Run from the rear
and
Dyno Run from the front
Of course the phone doesn't sound as loud as it is in person.
Maybe it is the phone, but doesn’t sound to loud to me. Also you could be used to the super gimp mass market Lexus exhaust note. I’m sure your SC sounded just as loud.
Old 12-18-20 | 01:37 PM
  #24  
TreysGS460's Avatar
TreysGS460
Intermediate
 
Joined: May 2016
Posts: 374
Likes: 163
From: Texas
Default

Surprised no one has asked, but what did you dyno?
The following users liked this post:
Daboy (05-15-21)
Old 12-18-20 | 02:20 PM
  #25  
timghetta's Avatar
timghetta
Thread Starter
Driver
 
Joined: Apr 2004
Posts: 132
Likes: 47
From: Florida
Default

This is how it looks now.


With a HPS Silicon tube and stock airbox with FSport, it wasn't breathing as well, changed it to the HPS filter and new polished pipe. Later I had changed that filter with good old fashion HKS Super Power Flow.

It was constrictive on the original setup during that dyno run it was 231hp and 269 ft/lb torque.
One of these days I'll go back and post new results.




Old 12-18-20 | 02:30 PM
  #26  
timghetta's Avatar
timghetta
Thread Starter
Driver
 
Joined: Apr 2004
Posts: 132
Likes: 47
From: Florida
Default

Originally Posted by DarthLex
Maybe it is the phone, but doesn’t sound to loud to me. Also you could be used to the super gimp mass market Lexus exhaust note. I’m sure your SC sounded just as loud.
​​​​The SC was a lot quieter, the phone doesn't record it as loud as it is, every time I see a cop I have to drive really slow, in ECO mode [

Originally Posted by Sargon
Titanium wrapped to minimize heat
Titanium to maximize cost
Breather hoses 1" x 4
Amazon Amazon

Brake Booster 0.5" x 4
Amazon Amazon

Not that expensive, $22 - $31

Old 12-24-20 | 09:51 AM
  #27  
timghetta's Avatar
timghetta
Thread Starter
Driver
 
Joined: Apr 2004
Posts: 132
Likes: 47
From: Florida
Default

I forgot to show you this little aspect of my intake.


The following users liked this post:
Rhydg1 (12-25-20)
Old 01-11-21 | 06:27 AM
  #28  
lexusluke6's Avatar
lexusluke6
Driver School Candidate
 
Joined: Jan 2021
Posts: 5
Likes: 0
From: florida
Default

Do you know how much wheel horsepower you are pushing because i want to get performance mods to make liike 290 wheel but idk if the lexus ecu still uncrackable.
Old 01-11-21 | 06:28 AM
  #29  
lexusluke6's Avatar
lexusluke6
Driver School Candidate
 
Joined: Jan 2021
Posts: 5
Likes: 0
From: florida
Cool horsepower

Originally Posted by timghetta
Thanks,

Gonna need resonators, way too loud, It's full exhaust from turbo to tips. Down pipe with the o2 bung threw a code. Now need to work that out. Will be flashing the ECU with a Stage 2 Plus.
How much horsepower are you making?
Old 01-11-21 | 11:51 AM
  #30  
timghetta's Avatar
timghetta
Thread Starter
Driver
 
Joined: Apr 2004
Posts: 132
Likes: 47
From: Florida
Default

Originally Posted by lexusluke6
How much horsepower are you making?
I have TTI flashed ecu tune.
The print out is above, 231 hp and 269 ft/lb at the wheel, outside temperature was 80F. but that was stock airbox w/fsport filter,
I since changed it with HKS super powerflow and aluminum intake from HPS, I think I am closer to 250 hp, car more responsive, need to go back to the dyno one of these days to test again.

I am looking into a hybrid turbo next, but need to wait.

Last edited by timghetta; 01-11-21 at 12:08 PM.



All times are GMT -7. The time now is 04:00 PM.