Need to un-slam rominl's LS460
#1
Driver
Thread Starter
iTrader: (3)
Join Date: Aug 2003
Location: Carson, California
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Need to un-slam rominl's LS460
Can any of you photoshop guru's un-slam Henry's VIP LS460 from this link...
https://www.clublexus.com/forums/sho...d.php?t=345932
the side profile from the second post, or the 4th post would be fine.
I am just looking for a subtle drop from a tanabe nf210 spring, so just a slight drop to fill the wheel well gap.
thanks in advance for your help....
I appreciate your efforts in helping me out.
thanks
Airek
https://www.clublexus.com/forums/sho...d.php?t=345932
the side profile from the second post, or the 4th post would be fine.
I am just looking for a subtle drop from a tanabe nf210 spring, so just a slight drop to fill the wheel well gap.
thanks in advance for your help....
I appreciate your efforts in helping me out.
thanks
Airek
#2
Loves Snickerdoodles!
I have no idea of how much NF210's will actually raise the car so I just pretty much eyeballed it.
Here's the original
...and here it it raised up slightly
Here's the original
...and here it it raised up slightly
#3
Driver
Thread Starter
iTrader: (3)
Join Date: Aug 2003
Location: Carson, California
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Seize,
thanks for the help that looks great, I was looking at some other threads in the LS460 section and somebody has some 22 with some Tanabe, and it looks like it would be a little bit higher. It would be great if the picture you generated is exactly where the tanabe's would put the car... if you could raise it a little bit, so just in case the tanabe's don't lower it that much, I would know what to expect...
thanks again for the effort.
thanks
Airek
thanks for the help that looks great, I was looking at some other threads in the LS460 section and somebody has some 22 with some Tanabe, and it looks like it would be a little bit higher. It would be great if the picture you generated is exactly where the tanabe's would put the car... if you could raise it a little bit, so just in case the tanabe's don't lower it that much, I would know what to expect...
thanks again for the effort.
thanks
Airek
#4
Loves Snickerdoodles!
Here it is raised considerably higher. Also, keep in mind rominL's car in those pictures had a bodykit on it which is why it looks much lower than it really is.
Trending Topics
#8
Super Moderator
Another member in this forum got the car from him as is with all the mods, just that she never posted more pics of the car, but I think it's still possible to see the LS, not sure if she sold the rims though ...