View Poll Results: who wants lowering options for AWD RC350 all wheel drive
Multiple Choice Poll. Voters: 31. You may not vote on this poll
rc350 AWD lowering options
#20
Lead Lap
iTrader: (2)
As mentioned previously, we have only tested on the RWD RC350. Before we even released springs for the RC people were installing the TNF170 springs. We cannot confirm what can fit on the AWD as we have not tested on one since most people in California see no need in the AWD version of the RC
So for those that got their TNF170 springs, may I ask where you got your springs for and how much they are?
Thanks.
#23
The pursuit of F
Looks really great!
TNF210 is the general model for the spring . http://www.tanabe-usa.com/nf210.asp?id=2
Did you get the TNF170 or TNF182?
How's the ride comfort and handling over stock?
TNF210 is the general model for the spring . http://www.tanabe-usa.com/nf210.asp?id=2
Did you get the TNF170 or TNF182?
How's the ride comfort and handling over stock?
#24
Driver School Candidate
Looks really great!
TNF210 is the general model for the spring . http://www.tanabe-usa.com/nf210.asp?id=2
Did you get the TNF170 or TNF182?
How's the ride comfort and handling over stock?
TNF210 is the general model for the spring . http://www.tanabe-usa.com/nf210.asp?id=2
Did you get the TNF170 or TNF182?
How's the ride comfort and handling over stock?
#26
Driver
iTrader: (1)
TNF170's
Just installed the TNF170's today on my AWD. The back springs are a straight forward swap like the rear wheel drive cars.
The fronts are similar to the RWD's except where the strut bracket goes around the half shafts. There is a bolt underneath the strut to separate from the bracket / control arm. Care must be taken when reinstalling as there is a flat on one side that must line up to reinstall.
I will post pics tomorrow.
The fronts are similar to the RWD's except where the strut bracket goes around the half shafts. There is a bolt underneath the strut to separate from the bracket / control arm. Care must be taken when reinstalling as there is a flat on one side that must line up to reinstall.
I will post pics tomorrow.
#28
Driver
iTrader: (1)
A slight rotation either way from the end of the last coil in the perch either way can make a big difference.