Pics of your RC NOW!
#691
I had to run about a 1/16 to 1/8 ish shim on fronts because they just barely skimmed the calipers. Will turn lock to lock
With no rub and also nothing on full suspension compression “hard landing” 😂 still wanting to come down an inch. Pretty sure they still won’t rub. I would recommend them !!
No issues with all wheel drive. Rotation is within .1% per mile 👍
The following users liked this post:
NewLexGuy (04-13-20)
#693
Driver School Candidate
Sorry my reply took so long. No rubbing at all whatsoever.
I had to run about a 1/16 to 1/8 ish shim on fronts because they just barely skimmed the calipers. Will turn lock to lock
With no rub and also nothing on full suspension compression “hard landing” 😂 still wanting to come down an inch. Pretty sure they still won’t rub. I would recommend them !!
No issues with all wheel drive. Rotation is within .1% per mile 👍
I had to run about a 1/16 to 1/8 ish shim on fronts because they just barely skimmed the calipers. Will turn lock to lock
With no rub and also nothing on full suspension compression “hard landing” 😂 still wanting to come down an inch. Pretty sure they still won’t rub. I would recommend them !!
No issues with all wheel drive. Rotation is within .1% per mile 👍
#694
Running summer tires front and back. Offset was supposed to be. 35 and 40. I don’t think that’s what they ended up being. I didn’t measure it when I got them in. I was going to go with vossen, so that’s what they came up with for vossen. Idk Ab these though. I do know that Toyota black mica touch up paint is a really close match for curb touch ups. 😂
#695
The following users liked this post:
ThomasD94 (09-01-19)
#697
Just a Taste
#698
#699
#700
New pics with the new wheels and a solid clean and polishing...
#703
Driver School Candidate
Re: RC 350 Black lettered emblems
Hello. Your white rc350 looks great and loving the black letter emblem. Wondering what exactly you did or used to change them to black? Please let me know if you would, thanks!
[/
[/
#704
I used plastidip for the rear and fender embelms and lettering. It is fairly easy to do...it is all in the prep. Send me a DM if you are interested and I can share photos of the set up.