RC350: Post Your Aftermarket Wheel Fitment and Tires
#77
Btw,what is the minumum offset that I can go with ??
I want to get that deep concave look in the back and front too ??
I'm thinking to go with 20x9 front and 20x10 rear in Rohana RC22
I know that lower the offset bigger the impact on concavity.
Any advice/input ??
The following users liked this post:
erayd8 (05-15-20)
#78
a little help guys
I'm almost ready to pull a trigger ona new set of wheels and tire and I'm leaning toward Rohana Rc22 in matte black.
So my question is...What is the lowest offset that I can get away with without doing any mods to fenders or some similar ****e ??Since I'm going for that deep concave look,specially in the back and I'm trying to figure it out what would be the best possible options for the wheel/tire combo.I'm looking for the feedback on the offset options.I know,that lower the offset better the concavity,right ?!?!
I'm also planning to lower the car with RSR DOWN springs.
I'm leaning towards so all the input would be greatly appreciated.
20x10 25mmFinish: Black
So my question is...What is the lowest offset that I can get away with without doing any mods to fenders or some similar ****e ??Since I'm going for that deep concave look,specially in the back and I'm trying to figure it out what would be the best possible options for the wheel/tire combo.I'm looking for the feedback on the offset options.I know,that lower the offset better the concavity,right ?!?!
I'm also planning to lower the car with RSR DOWN springs.
I'm leaning towards so all the input would be greatly appreciated.
FRONT
20x9 25mm
20x9 25mm
Finish: Black
Offset: 25mm
Brand: Rohana
Name: RC22
PN: RC222095114MB25
REAR20x10 25mm
Offset: 25mm
Brand: Rohana
Name: RC22
PN: RC2220105120MB25
#79
I'm almost ready to pull a trigger ona new set of wheels and tire and I'm leaning toward Rohana Rc22 in matte black.
So my question is...What is the lowest offset that I can get away with without doing any mods to fenders or some similar ****e ??Since I'm going for that deep concave look,specially in the back and I'm trying to figure it out what would be the best possible options for the wheel/tire combo.I'm looking for the feedback on the offset options.I know,that lower the offset better the concavity,right ?!?!
I'm also planning to lower the car with RSR DOWN springs.
I'm leaning towards so all the input would be greatly appreciated.
20x10 25mmFinish: Black
So my question is...What is the lowest offset that I can get away with without doing any mods to fenders or some similar ****e ??Since I'm going for that deep concave look,specially in the back and I'm trying to figure it out what would be the best possible options for the wheel/tire combo.I'm looking for the feedback on the offset options.I know,that lower the offset better the concavity,right ?!?!
I'm also planning to lower the car with RSR DOWN springs.
I'm leaning towards so all the input would be greatly appreciated.
FRONT
20x9 25mmFinish: BlackOffset: 25mmBrand: RohanaName: RC22PN: RC222095114MB25
REAR20x9 25mmFinish: BlackOffset: 25mmBrand: RohanaName: RC22PN: RC222095114MB25
20x10 25mm
Offset: 25mmBrand: RohanaName: RC22PN: RC2220105120MB25
#80
that doesn't sounds too bad.Those are original sizes anyway !
I'll talk to the guys in shop and see can I squeeze in 275's in the back.
#81
Help with wheel offsets for Weds Bazreia
Hi guys, I'm new to the Lexus brand and the forums here. Previous e92 M3 owner that wanted more reliability
I just got my RC 350 AWD last week and need some suggestions for the wheels I chose. 19" Weds Kranze Bazreia with aggressive offsets for maximum lip Front and back. Also, which tire sizes should I run? I don't want to have to stretch the tires too much. Protecting the wheels from the road is important since I live in a pot hole ridden state.
I assume the RC doesn't need a roll since there is hardly anything to roll in the front and nothing in the back. I'd prefer no mod to the body to get wheels and tires to fit. I'm also planning to drop on at least Tanabe springs, maybe coilovers.
Thank you in advance to you wheel and tire gurus
I just got my RC 350 AWD last week and need some suggestions for the wheels I chose. 19" Weds Kranze Bazreia with aggressive offsets for maximum lip Front and back. Also, which tire sizes should I run? I don't want to have to stretch the tires too much. Protecting the wheels from the road is important since I live in a pot hole ridden state.
I assume the RC doesn't need a roll since there is hardly anything to roll in the front and nothing in the back. I'd prefer no mod to the body to get wheels and tires to fit. I'm also planning to drop on at least Tanabe springs, maybe coilovers.
Thank you in advance to you wheel and tire gurus
#82
Nothing so crazy here, just a non staggered setup.
I just put these on yesterday and am pretty pleased with the results. I have an 2016 RC350 F-Sport AWD and living in Edmonton, where we have 6 months of winter, I put snow tires on the stock wheels about a month after buying the car so I wanted to utilize the nearly new stock tires on another set of rims. I have two sets of rims and tires for all of our vehicles here (4 cars and a Jeep) and switch them back and forth summer to winter.
I wanted something that came closer to edge of the wheel well that the stock wheels and picked up a set of 19" x 8.5" +35 offset wheels. I had the stock 235/40R19s mounted on them. I picked them up lightly used (they looked almost new) for $400 CAD so I don't have an exact model number, maybe Ace Alloy Mesh 7? I also added hub centric adapters and TPMS sensors.
I was not looking for black wheels, but am happy with the way they turned out. Weather is a little crappy today, but I just snapped a couple of camera phone pics until I have time to do some better ones.
I just put these on yesterday and am pretty pleased with the results. I have an 2016 RC350 F-Sport AWD and living in Edmonton, where we have 6 months of winter, I put snow tires on the stock wheels about a month after buying the car so I wanted to utilize the nearly new stock tires on another set of rims. I have two sets of rims and tires for all of our vehicles here (4 cars and a Jeep) and switch them back and forth summer to winter.
I wanted something that came closer to edge of the wheel well that the stock wheels and picked up a set of 19" x 8.5" +35 offset wheels. I had the stock 235/40R19s mounted on them. I picked them up lightly used (they looked almost new) for $400 CAD so I don't have an exact model number, maybe Ace Alloy Mesh 7? I also added hub centric adapters and TPMS sensors.
I was not looking for black wheels, but am happy with the way they turned out. Weather is a little crappy today, but I just snapped a couple of camera phone pics until I have time to do some better ones.
#83
#86
#87
I'm selling my Vossen VSF2 20" - Tires only 4 weeks old.
9 +32/10.5 +45
Located in SoCal if anyone is interested.
Perfect fitment and came off my RC 350 F Sport
Attachment 490739
9 +32/10.5 +45
Located in SoCal if anyone is interested.
Perfect fitment and came off my RC 350 F Sport
Attachment 490739
#88