What Have You Done To Your RC F Today?
The following 2 users liked this post by sensai:
BossMoss (05-17-19),
konichiwa3 (05-17-19)
#527
Oh, I also bought the varis cf long tail! Can't wait for it to arrive.
#528
Met up with another forum member so he could hear the PPE headers and exhaust in person. So much better than a sound clip. It's always nice seeing another RC-F.
#529
Can't wait for my PPE exhaust to arrive! The switch is located differently now from yours BossMoss. I like your valve button location better; went with the fobs.
The following users liked this post:
BossMoss (05-18-19)
#530
I have the fobs but I like that toggle switch better than counting to 5 with the fob
The following users liked this post:
BossMoss (05-18-19)
#531
#532
You should be able to move it to any location you prefer, since the switch is so small. Mine is in a blank switch panel that is now where my trunk opener used to be. I had moved my trunk switch up to the main bank of switches for convenience.
Last edited by BossMoss; 05-30-19 at 10:45 PM. Reason: typo
#533
Feeling the "Blues" underneath the hood.
Thanks to BossMoss for the inspiration. TRD oil cap.
The following users liked this post:
BossMoss (05-19-19)
#534
The following users liked this post:
konichiwa3 (05-20-19)
#536
Lexus Test Driver
Took the car to the dealership today for 32,000 KM service (car has 16,000 KM). They detailed it very nicely and the tech I asked for is an expert in F cars so he was extremely thorough.
Dealership said alignment was not needed and should wait until I get my next tires for an alignment. I have quite a lot of negative camber, which the tech said was good for handling and track. Though, I have more inner wear on tires, the tech said he would not recommend an alignment since the conservatice specs would make the car 'handle like a Corolla' LOL I might do it after I get the new MPS4S XL tires and the stiff lower control arms.
OEM Tires: 5mm all around left so quite a bit of tread still there. More inner tire wear. Tech recommended 40 psi, but car becomes too jumpy/darty at 40 psi under hard acceleration. Also, lose the steering feel and becomes too numb and vague so going to stick with my 36F/38R tested one. Again, tires are a big letdown on the RCF. Cannot wait to get the MPS4S XL RCF-spec tires, but have to wait till these wear down until next year.
OEM Brakes: 7 mm all around so quite a lot of pad still left. Hopefully, can get another 15,000 - 20,000 km before I get down to 3 mm.
Battery: Slightly weak battery due to winter storage. Will have to disconnect the negative terminal the next time.
Dealership said alignment was not needed and should wait until I get my next tires for an alignment. I have quite a lot of negative camber, which the tech said was good for handling and track. Though, I have more inner wear on tires, the tech said he would not recommend an alignment since the conservatice specs would make the car 'handle like a Corolla' LOL I might do it after I get the new MPS4S XL tires and the stiff lower control arms.
OEM Tires: 5mm all around left so quite a bit of tread still there. More inner tire wear. Tech recommended 40 psi, but car becomes too jumpy/darty at 40 psi under hard acceleration. Also, lose the steering feel and becomes too numb and vague so going to stick with my 36F/38R tested one. Again, tires are a big letdown on the RCF. Cannot wait to get the MPS4S XL RCF-spec tires, but have to wait till these wear down until next year.
OEM Brakes: 7 mm all around so quite a lot of pad still left. Hopefully, can get another 15,000 - 20,000 km before I get down to 3 mm.
Battery: Slightly weak battery due to winter storage. Will have to disconnect the negative terminal the next time.
Last edited by 05RollaXRS; 05-22-19 at 09:47 PM.
The following users liked this post:
Mr. Klean (05-23-19)
The following users liked this post:
tuscani66 (06-02-19)
The following 2 users liked this post by GetKinetic:
ModInJapan (05-28-19),
tuscani66 (06-02-19)
#539
Coming from Australia. This is the one with the light which I preferred. Model MS422-00001 (which has been discontinued). The one without the light for gas engines I believe is MS422-00003
https://www.ebay.com/itm/TRD-PUSH-ST...53.m2749.l2649
Looks like there's one left.
https://www.ebay.com/itm/TRD-PUSH-ST...53.m2749.l2649
Looks like there's one left.
#540
https://www.clublexus.com/forums/is-...-button-2.html
There's another member here that has one on the RC F but didn't list the part number although did mention it was discussed in length in the IS and RC forums.
https://www.clublexus.com/forums/rc-...-not-like.html
Dangit!