Cameras
02-09-17 | 01:53 PM
#2
The following 3 users liked this post by pheen619:
02-09-17 | 07:17 PM
#3
Driver
Joined: Jul 2016
Posts: 58
Likes: 18
From: LA
That looks interesting...
I can't stand that our RC F doesn't have forward facing parking assist, but they are on the RC 350 and lower models. I find the front corner sensors nearly useless for real world parking.
I can't stand that our RC F doesn't have forward facing parking assist, but they are on the RC 350 and lower models. I find the front corner sensors nearly useless for real world parking.
Last edited by raerae1616; 02-10-17 at 12:14 PM.
02-10-17 | 11:47 AM
#4
Thread Starter
Driver
Joined: Aug 2011
Posts: 131
Likes: 4
From: ca
Sensors
I agree the front sensors suck they hardly ever work.....
02-10-17 | 11:50 AM
#5
Lexus Champion
Joined: Oct 2015
Posts: 2,424
Likes: 188
From: CA
My sensors work fine, only need them if I am close to something higher than a parking curb in front of me, and they work without issue.
I am disabled I typically park in disabled spots which have a sign, and the sensors always pick up the sign. They pick up the brick flower bed in front of my car where I park in my drive, and the trees and bushes along the side of my driveway..
They are not designed to pick up things down low, but they work fine for anything above the height of a parking curb.
I am disabled I typically park in disabled spots which have a sign, and the sensors always pick up the sign. They pick up the brick flower bed in front of my car where I park in my drive, and the trees and bushes along the side of my driveway..
They are not designed to pick up things down low, but they work fine for anything above the height of a parking curb.
02-10-17 | 12:09 PM
#6
Driver School Candidate
Joined: May 2016
Posts: 49
Likes: 4
From: MD
The link that Pheen619 provides at Beat Sonic is very interesting. It implies that the back camera (and the aftermarket front) is just plain NTSC. To me, it also implies that the main Nav monitor is just NTSC also, and that it has an RCA video input. However, I do not see that in the back of the monitor. It is not clear to me how the little switch box is telling the Nav monitor to select the video feed. Does anyone have any technical info?
Trending Topics
02-10-17 | 06:33 PM
#8
Pole Position
Joined: Aug 2013
Posts: 2,629
Likes: 250
From: CA
02-10-17 | 09:32 PM
#9
Thread Starter
Driver
Joined: Aug 2011
Posts: 131
Likes: 4
From: ca
Awesome
[QUOTE=pheen619;9765752]maybe this http://www.beatsonicusa.com/cs5ep.html[/QUOTEThanks for the info.....
02-12-17 | 07:09 AM
#10
Pit Crew
Joined: May 2015
Posts: 154
Likes: 35
From: MD
After watching the camera install video...
I've always thought the RCF screen was small. Looks like the 2017 IS screen would fit right in. Does anyone have a picture of the new IS screen rear connection? It would be nice to have a wider screen..
I've always thought the RCF screen was small. Looks like the 2017 IS screen would fit right in. Does anyone have a picture of the new IS screen rear connection? It would be nice to have a wider screen..
02-13-17 | 10:46 PM
#11
Thread Starter
Driver
Joined: Aug 2011
Posts: 131
Likes: 4
From: ca
Control
probably the control box is different
Thread
Thread Starter
Forum
Replies
Last Post