When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The fitment was NOT precise. All good EXCEPT I can still see a very thin line of about 1 mm vertically on the mirror housing next to the window glass. If your car is a dark color, it will hide better. But since my car us Ultra white, it is there (only looking from the driver's seat position inside looking out). . I'm ok with it. The base (stalk) of mirrors are not included. I just use carbon fiber look alike vinyl which closely matched the CF mirrors. Probably easier and cheaper to just do it all in vinyl?
Similar problem for the shark fin attenna I ordered from another vendor on eBay. There is a very thin 1 mm line/gap at the base.
I think I'll warp the active wing in CF vinyl wrap next!! I did the mirror base stalks with a heat gun at the lowest setting and it was way easier than I thought.
Originally Posted by SinisteRCF
Nice!!! I like the contrast of the mirrors and fin.
Finally, got around to installing those OEM US Spec Carbon Fiber Mirrors along with Upgrading the Puddle light to LED and I must say that MUG changes the look of the car...
Originally Posted by lexusrus
I got it on eBay.
Here is a link for the mirrors ($109):
10-24-17, 07:30 AM
