Can you spot something new with this RCF???
#3
#6
Pole Position
Thread Starter
All are CORRECT!!! EXCEPT NO FOG LIGHTS.
The outside mirrors and the shark fin are REAL carbon fiber. The outside mirrors were shipped from Cali so got to me quickly. But the shark fin came from Taiwan and took a while. Lucky for me, these matched closely even though cane from two totally different vendors.
No fog lights!! THEY ARE DEER WHISTLES (wind activated). These are SUPPOSED TO GET THE DEERS "FREEZ" AND LOOK AROUND INSTEAD OF RUNNING TOWARDS MY CAR!! So far so good.
In most parts of MS/TN/AL during deer hunting season, there are more deers than the human population!!!
The outside mirrors and the shark fin are REAL carbon fiber. The outside mirrors were shipped from Cali so got to me quickly. But the shark fin came from Taiwan and took a while. Lucky for me, these matched closely even though cane from two totally different vendors.
No fog lights!! THEY ARE DEER WHISTLES (wind activated). These are SUPPOSED TO GET THE DEERS "FREEZ" AND LOOK AROUND INSTEAD OF RUNNING TOWARDS MY CAR!! So far so good.
In most parts of MS/TN/AL during deer hunting season, there are more deers than the human population!!!
#7
Pole Position
Thread Starter
Trending Topics
#10
Pole Position
Thread Starter
I drive my RCF mostly in rural areas middle of nowhere in the Bible belt. ANY EXTRA lights will be beneficial especially right around sunrise/sunset. So far I have not found any fog lights that I can safely secure to the RCF AND THROWS OUT a decent amount of light. So in the Backcountry roads I use my high beams until an oncoming traffic and then I did down to low beams.
#14
Pole Position
Thread Starter
I got it on eBay.
Easy to stick them on.
The fitment was NOT precise. All good EXCEPT I can still see a very thin line of about 1 mm vertically on the mirror housing next to the window glass. If your car is a dark color, it will hide better. But since my car us Ultra white, it is there (only looking from the driver's seat position inside looking out). . I'm ok with it. The base (stalk) of mirrors are not included. I just use carbon fiber look alike vinyl which closely matched the CF mirrors. Probably easier and cheaper to just do it all in vinyl?
Similar problem for the shark fin attenna I ordered from another vendor on eBay. There is a very thin 1 mm line/gap at the base.
Here is a link for the mirrors ($109):
https://rover.ebay.com/rover/0/0/0?m...2F192193386358
CF shark fin mock up with CF mirrors and CF vinyl wrap comparison.
Here is the link for the shark fin ($89):
https://rover.ebay.com/rover/0/0/0?m...2F172447305348
Easy to stick them on.
The fitment was NOT precise. All good EXCEPT I can still see a very thin line of about 1 mm vertically on the mirror housing next to the window glass. If your car is a dark color, it will hide better. But since my car us Ultra white, it is there (only looking from the driver's seat position inside looking out). . I'm ok with it. The base (stalk) of mirrors are not included. I just use carbon fiber look alike vinyl which closely matched the CF mirrors. Probably easier and cheaper to just do it all in vinyl?
Similar problem for the shark fin attenna I ordered from another vendor on eBay. There is a very thin 1 mm line/gap at the base.
Here is a link for the mirrors ($109):
https://rover.ebay.com/rover/0/0/0?m...2F192193386358
CF shark fin mock up with CF mirrors and CF vinyl wrap comparison.
Here is the link for the shark fin ($89):
https://rover.ebay.com/rover/0/0/0?m...2F172447305348
#15
Pole Position
Thread Starter