RR Racing RCF Chassis Brace
The following 2 users liked this post by yellow2112:
luislopezt (05-14-19),
RRRacing (05-16-19)
#3
Instructor
Did you receive any instructions with that? Meaning - is it a simple Bolt On w existing Mounts, or does it come w any special buffers? (I wont even ask cost like most)
#4
No special buffers recommended or received in the box, so pretty much a bolt on.
Cost is no secret as it can be obtained directly on the RR website.
https://www.rr-racing.com/default.asp
The bar is $449.
The blue chrome color was an extra $40 and the carbon fiber laminate was $68
Total was $558 plus shipping
There was no such information about removing the nuts and re-torque info as its all pretty straightforward...
The bar was well packaged and protected and took about 2 weeks to get from date of order.
Last edited by yellow2112; 05-14-19 at 06:44 AM.
#6
Instructor
Likin This
*Special Request:...You ok doing Step-By-Step Mounting Post with Pics for the rest of us? I'm anxious to learn exactly how its installed w those washers, etc. Something tells me this may even be a two person job at some point when trying to get both ends socked down evenly - that torque spec would be advantageous too!
#7
If they have them in stock I'd think it would get to you sooner than 14 days? I noticed it doesn't specify Model Years - so I assume its for ALL RC-Fs correct? What Year and Color is your F ? - Blue would be my choice to match my USB, but they only put carbon in those spaces on it-not the whole thing Carbon colored? My car will never hit a track so it would be an aesthetic mod in my case. Curious if it makes the ride any stiffer, or changes the feel of your front wheels / steering?
*Special Request:...You ok doing Step-By-Step Mounting Post with Pics for the rest of us? I'm anxious to learn exactly how its installed w those washers, etc. Something tells me this may even be a two person job at some point when trying to get both ends socked down evenly - that torque spec would be advantageous too!
*Special Request:...You ok doing Step-By-Step Mounting Post with Pics for the rest of us? I'm anxious to learn exactly how its installed w those washers, etc. Something tells me this may even be a two person job at some point when trying to get both ends socked down evenly - that torque spec would be advantageous too!
I'm having a local shop install, so can't help you on the step by step, but its likely 10 nuts to remove, so wouldn't be terribly difficult.
Trending Topics
#9
Instructor
Doesn't seem that blue matches the hue of the intake. The "Blue Chrome" is close. The RCF Facebook Group is raving about this mod and a Member there is going to do a Step-By-Step---which you are correct, is appears only to be two bolts. I'll be adding this to my list after the New Wheels & Tires arrive!
The following 2 users liked this post by 1herm4:
fasttexasz (05-18-19),
GunnyFitz (05-17-19)
#11
Instructor
Oh that's kind of you.
You guys know the steps on changing the Triple Clamp, Forks, Swingarm or rear wheel on a Ducati perhaps?
I'd expect better from you two. Thanks so much. Out.........
You guys know the steps on changing the Triple Clamp, Forks, Swingarm or rear wheel on a Ducati perhaps?
I'd expect better from you two. Thanks so much. Out.........
#12
Doesn't seem that blue matches the hue of the intake. The "Blue Chrome" is close. The RCF Facebook Group is raving about this mod and a Member there is going to do a Step-By-Step---which you are correct, is appears only to be two bolts. I'll be adding this to my list after the New Wheels & Tires arrive!
#13
Tech Info Resource
iTrader: (2)
Can you stick a ball mill in a port and actually improve flow? I can...
The following users liked this post:
GunnyFitz (05-22-19)
#14
Instructor
Sweet!
There ya go Lobux! Wasnt really directing those questions to you per se. I see one Member deleted their opinion of me from the two I was directing my response to. It's all good. Post me some pics of your favored bike of choice - at least I wont need step by step directions on how to view them!
#15
Intalled pics
At this point we're getting to be a rolling RR Racing advert..
Also installed the CF intake cover, and I already had the RR Intake tube, RR AOS and EL headers (installed at RR), RR USRS, RR engine mounts, Borla exhaust / CF tips, RR engine mounts and RR ECU Tune.
Also installed the CF intake cover, and I already had the RR Intake tube, RR AOS and EL headers (installed at RR), RR USRS, RR engine mounts, Borla exhaust / CF tips, RR engine mounts and RR ECU Tune.