Quest for more induction noise: My cold air intake thread
10-10-20 | 01:31 AM
#91
Racer
Joined: Nov 2007
Posts: 1,298
Likes: 550
From: cali
So here are a couple of video. Did quite a variety of different types of driving. Low rpm, midrange and high rpm spirited driving. Maybe, an exterior driving video in the future, but it will have to wait till next year. This is it for this year as I am storing the car in two weeks or so,
I used a very high quality camera with high quality audio to capture everything possible, but still unfortunately the mic does not pick up all of the sound frequencies generated in the cabin. Still close enough.
This video has a mix of both some low rpm/midrange rpm driving as well as full throttle accelerations. Some throttle response tests in there as well
https://www.youtube.com/watch?v=mx0I4OVKE4w
This is a video with primarily spirited highway driving. Some turns and windy roads. Maybe, I should have set the camera further back because the speed does not come through at all. I took the sharp turn at 0:25 at 65 mph and it looks like it is 45 mph. Still, the camera shakes at the entry because the rear got unsettled as I aggressively turned in.
At 3:00 I test the signature cold air intake "growl/snarl" by pushing the throttle at low rpm and high gear
https://www.youtube.com/watch?v=m5Lz4UdIc34&t=185s
I used a very high quality camera with high quality audio to capture everything possible, but still unfortunately the mic does not pick up all of the sound frequencies generated in the cabin. Still close enough.
This video has a mix of both some low rpm/midrange rpm driving as well as full throttle accelerations. Some throttle response tests in there as well
https://www.youtube.com/watch?v=mx0I4OVKE4w
This is a video with primarily spirited highway driving. Some turns and windy roads. Maybe, I should have set the camera further back because the speed does not come through at all. I took the sharp turn at 0:25 at 65 mph and it looks like it is 45 mph. Still, the camera shakes at the entry because the rear got unsettled as I aggressively turned in.
At 3:00 I test the signature cold air intake "growl/snarl" by pushing the throttle at low rpm and high gear
https://www.youtube.com/watch?v=m5Lz4UdIc34&t=185s
The following users liked this post:
05RollaXRS (10-10-20)
10-10-20 | 11:25 AM
#92
Thread Starter
Lexus Test Driver
Joined: Oct 2005
Posts: 9,980
Likes: 2,512
From: Calgary, AB
Last edited by 05RollaXRS; 10-10-20 at 11:41 AM.
The following users liked this post:
cvt (10-11-20)
10-12-20 | 05:04 AM
#93
Driver
Joined: May 2019
Posts: 116
Likes: 66
From: Ontario
Hey man,
Came off very easily. You just need a little heat source. I used a blow dryer on high heat and it came off easily. While heating it, I gently scratched the edge of the sticker with a key. It starts coming off. Took me 2 minutes. Yeah, I would take off the red one if it is coming off and putting an F logo would make it look so much nicer. I might end up doing the same as well. Cheers!
Came off very easily. You just need a little heat source. I used a blow dryer on high heat and it came off easily. While heating it, I gently scratched the edge of the sticker with a key. It starts coming off. Took me 2 minutes. Yeah, I would take off the red one if it is coming off and putting an F logo would make it look so much nicer. I might end up doing the same as well. Cheers!
I added the F logo to the Takeda side of the air box. Disappointed with their emblem. This one is metal so at least it won’t peel up and bend.
The following 3 users liked this post by Dribble:
10-12-20 | 10:31 AM
#94
Thread Starter
Lexus Test Driver
Joined: Oct 2005
Posts: 9,980
Likes: 2,512
From: Calgary, AB
10-12-20 | 04:17 PM
#95
Racer
Joined: Nov 2007
Posts: 1,298
Likes: 550
From: cali
The following 2 users liked this post by cvt:
05RollaXRS (10-13-20),
Dribble (10-13-20)
10-13-21 | 04:14 PM
#98
Thread Starter
Lexus Test Driver
Joined: Oct 2005
Posts: 9,980
Likes: 2,512
From: Calgary, AB
It is working out great for me. No issues. The Takeda does not replace the OEM box so I don't feel any torque loss. It feels fine at low rpms. The car feels stronger in the midranges and has a nice louder growl especially in the midranges. At the top rpm, it is hard to tell as it maybe is around 3 - 4 whp gain at the most. I also got the oiled version, which has higher airflow rate.
10-13-21 | 04:24 PM
#99
Intermediate
Joined: Sep 2021
Posts: 309
Likes: 73
From: CA
Having watched the installation of the takeda at the beginning of the thread...and knowing that some mfg are putting electric superchargers on their cars....seems a pretty simple thing to put an electric blower in line to boost a few psi. Has anyone done that? You'd only want it a few seconds.
10-13-21 | 06:29 PM
#100
Thread Starter
Lexus Test Driver
Joined: Oct 2005
Posts: 9,980
Likes: 2,512
From: Calgary, AB
Having watched the installation of the takeda at the beginning of the thread...and knowing that some mfg are putting electric superchargers on their cars....seems a pretty simple thing to put an electric blower in line to boost a few psi. Has anyone done that? You'd only want it a few seconds.
The following users liked this post:
Dribble (10-14-21)
The following users liked this post:
05RollaXRS (10-14-21)
Thread
Thread Starter
Forum
Replies
Last Post