When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does anyone have any information on this exhaust setup
I came across this setup online. Company is called RES it's based in China. They produce titanium valved setups for our cars, the price Is extremely competitive if not too good. Does anyone have information about the company, gains of this exhaust setup and reliability. Please chime in if any information.
More information the piping diameter of the exhaust is 2.48 mm as opposed to other aftermarket options on 2.75 and 3 mm apparently they took the oem measurements don't know if that is OK for an aftermarket option
More information the piping diameter of the exhaust is 2.48 mm as opposed to other aftermarket options on 2.75 and 3 mm apparently they took the oem measurements don't know if that is OK for an aftermarket option
There are some other aftermarket exhausts like the now-discontinued Borla that were 2.5 inches so it is not uncommon. The Invidia is 2.75 inches. I have heard RR Racing say 2.5 inches vs 2.75 inches does not make a significant difference.
2.5" on these cars is fine. The big gains come from deleting the secondary cats in the mid-pipe. So full titanium in this case is really just weight savings and sound.
That is a lot of pie cuts and welding for sure. I have the GTHaus Ti midpipe and Toms Ti exhaust on my GSF. The Toms has mandrel bent Ti piping. The GTHaus also has mandrel bent Ti piping and minimal welds-mostly at the crossover section. I think the total weight of my full Ti exhaust-midpipe combo was 27lbs so 33 is not bad depending on the price.