TunedRX300

rear minimum rotor thickness is 9mm, 10 mm is the standard thickness.
rear max rotor runout is 0.15mm

hitthepin

Thanks for clearing that up for me.

Arden

The thickness 9.0 mm, is It serviceble?, I mean can I resurface them /Or do we have to replace the rotors

Carver

Well, I guess this thread from the dead deserves an epilogue. The 300 was totaled in March 2011 and the Brembo/Akebono combination had 22K trouble free miles on it when that happened. When I got an inspection sticker in Feb there was still 8mm left on the pads all around.

I was so impressed I have ordered Akebono pads for my 330 and also some drilled rotors. Unfortunately, I couldn't find any drilled Brembos so I went with another no name make.

So long 300, I miss ya!

salimshah

Previous post says the limit is 9mm, and you are at 9 already. You know the answer .. use as is or replace. If you take it for resurfacing, material will be removed from both sides.

Salim