RX - 1st Gen (1999-2003) Discussion topics related to the 1999 -2003 RX300 models

Car Don't Start After 12hrs Parked

Thread Tools
 
Search this Thread
 
Old 09-10-07 | 10:41 AM
  #1  
gazi001's Avatar
gazi001
Thread Starter
Lexus Test Driver
 
Joined: Aug 2006
Posts: 954
Likes: 4
From: NY
Default Car Don't Start After 12hrs Parked

My 2000 Rx 300 AWD has a strange problems for few days. When I parked the
car like in the evening and next morning i try to start the engine 3/4 times it donot start. But when i press & hold the gas pedal and tray to start
the engine it does start. Yesterday i start the car same way but it stop after
few seconds again again. I have no CEL code or signs on the dash board. I do
on time oil changes. My car has a mileages of 82000. I did change the spark plugs about 70000 mileages. Few weeks ago i change the MAF sensor. Does anyone has similiar problems ? Suggestions and infos highly appreciated.
Old 09-10-07 | 11:20 AM
  #2  
salimshah's Avatar
salimshah
Moderator
 
Joined: Apr 2001
Posts: 15,748
Likes: 1,134
From: Austin, TX
Default

can you please elaborate .. Does not start?

Is the stater able to turn the engine over at sufficient speed?

How clean are injectors?
You may like to get the ecu read.

Salim
Old 09-10-07 | 11:29 AM
  #3  
gazi001's Avatar
gazi001
Thread Starter
Lexus Test Driver
 
Joined: Aug 2006
Posts: 954
Likes: 4
From: NY
Default

It start if i press & hold the gas pedal . After few minutes of engine running the car runs good. But the problem at the morning when the car is cold, it donot start normaly. Injectors cleaned by dealer 7/8 months before.
Old 09-10-07 | 03:02 PM
  #4  
salimshah's Avatar
salimshah
Moderator
 
Joined: Apr 2001
Posts: 15,748
Likes: 1,134
From: Austin, TX
Default

Seems like an issue with idle control (air fuel mixture and others). Best would be to get a ecu dump.

Salim
Old 09-10-07 | 03:09 PM
  #5  
gazi001's Avatar
gazi001
Thread Starter
Lexus Test Driver
 
Joined: Aug 2006
Posts: 954
Likes: 4
From: NY
Default

Thanks Salim. Would you please explain how I do ecu dump ? Means reset
ECU!
Old 09-10-07 | 05:49 PM
  #6  
salimshah's Avatar
salimshah
Moderator
 
Joined: Apr 2001
Posts: 15,748
Likes: 1,134
From: Austin, TX
Default

Reset: by disconnecting the battery for 20 minutes or so will clear the ecu memory.

Before you wipe the history, a dump can be obtained by obdII (this is what I meant by getting a dump). Dealership or Autozone can do it.

If you reset, then you have to drive for a week.

Salim
Old 09-10-07 | 06:07 PM
  #7  
guitarmike's Avatar
guitarmike
Rookie
 
Joined: Aug 2007
Posts: 61
Likes: 0
From: NC
Default

Definitely Idle Air Control valve sticking. Recommend taking to your local dealer and having the idle air control valve replaced. That is unless you have the tools and relative know how on how to replace it.
Old 09-10-07 | 10:41 PM
  #8  
gazi001's Avatar
gazi001
Thread Starter
Lexus Test Driver
 
Joined: Aug 2006
Posts: 954
Likes: 4
From: NY
Default

Can u tell me details about the idle air control valve and the price ? How I install the valve ? Thanks again.
Old 09-11-07 | 02:24 AM
  #9  
rl9905's Avatar
rl9905
Driver
 
Joined: Jun 2004
Posts: 173
Likes: 2
From: California
Default

Oh wow, I had the same exact problem like two years ago on my 2000 RX300. I had about 40K miles at the time. I took it to the dealership and they replaced the IACV (Idle Air Control Valve). Afterwards, my RX300 was perfect again ever since.
Old 09-12-07 | 11:26 PM
  #10  
gazi001's Avatar
gazi001
Thread Starter
Lexus Test Driver
 
Joined: Aug 2006
Posts: 954
Likes: 4
From: NY
Default

Thanks. I will buy and install with my mechanic. Is it a hard or easy job?
Old 09-16-07 | 08:20 PM
  #11  
gazi001's Avatar
gazi001
Thread Starter
Lexus Test Driver
 
Joined: Aug 2006
Posts: 954
Likes: 4
From: NY
Default

I cleaned the old IACV with throtle body spray and now my engine has no problem. Lets see how long it will work. Thanks everyone.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MJA1951
LS - 3rd Gen (2001-2006)
1
04-18-18 07:14 PM
seanlin
Hybrid Technology
3
06-23-13 09:13 PM
Joey97
ES - 1st to 4th Gen (1990-2006)
8
05-15-12 12:21 PM
mcamson
GS - 3rd Gen (2006-2011)
4
02-24-09 10:24 PM




All times are GMT -7. The time now is 06:38 AM.