Nose Mask/Bra?
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2001
Location: MA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Nose Mask/Bra?
Hello All,
I'm getting delivery of my Indigo Nav on Monday night (Yeah!) and we decided, of course, to forgo the plastic coat for the front of the car. However, I would like to put on a Nose Mask for long trips/Inclement weather (most of winter here in NE )
Has anyone found any for the 2002 RX300?
Thanks!
Art
I'm getting delivery of my Indigo Nav on Monday night (Yeah!) and we decided, of course, to forgo the plastic coat for the front of the car. However, I would like to put on a Nose Mask for long trips/Inclement weather (most of winter here in NE )
Has anyone found any for the 2002 RX300?
Thanks!
Art
#2
RX 300 & 350Z Guru
Join Date: Feb 2001
Location: Georgia
Posts: 3,256
Likes: 0
Received 0 Likes
on
0 Posts
There is a stone/rock/bug guard at http://www.irontoad.com IMO, it is ugly, but may be a good choice since it can be put on and taken off when you need it. Probably easier than a bra to remove.
http://www.irontoad.com/art_lex/l_nose.jpg
-Nick
http://www.irontoad.com/art_lex/l_nose.jpg
-Nick
#3
While I don't advocate using a front mask (I use to in the past and live in the NE also), here is company that makes all kinds and for the RX300:
http://www.covercraft.com/
Let me know if you have a hard time finding a dealer.
Hope this helps,
TC
http://www.covercraft.com/
Let me know if you have a hard time finding a dealer.
Hope this helps,
TC
#4
Lexus Fanatic
Join Date: May 2001
Location: Connecticut
Posts: 5,145
Likes: 0
Received 0 Likes
on
0 Posts
#6
Lexus Fanatic
Join Date: May 2001
Location: Connecticut
Posts: 5,145
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
Not pictures..however bra goes on in about 15 minutes..
two piece unit fits incredibly well using Lexus pre-setup
unused holes on the underside of the hood!!
Well worth the investment for long highway trips...just got back
from a 3000 trrip...NOT STONE OR BUGGIES ON THE FRONT END!
two piece unit fits incredibly well using Lexus pre-setup
unused holes on the underside of the hood!!
Well worth the investment for long highway trips...just got back
from a 3000 trrip...NOT STONE OR BUGGIES ON THE FRONT END!
#11
Bioart,
Here's another option.
3M PLASTIC
This is a 3M's 8 mil clear-coated urethane plastic. It is specifically designed to preserve the beauty and integrity of exterior automotive finishes without compromising or altering the appearance of the vehicle. The material itself is guaranteed by 3M for 5 years against manufacturers defects and not to yellow, crack or craze. It covers front bumper, hood, mirrors, rear bumper top, and rear bumper. The plastic is barely visible from 3 feet away and hardly visible on dark or silver color models. I'm very satisfied, especially knowing it will be protected from the damage. Check www.xpel.com or www.clearmask.com for additional info. If you decide to order it, call Alan at 407-927-1900. (approx $170) or 1-407-833-0505 or invinca-shield.com. He is the cheapest.
Good luck
Here's another option.
3M PLASTIC
This is a 3M's 8 mil clear-coated urethane plastic. It is specifically designed to preserve the beauty and integrity of exterior automotive finishes without compromising or altering the appearance of the vehicle. The material itself is guaranteed by 3M for 5 years against manufacturers defects and not to yellow, crack or craze. It covers front bumper, hood, mirrors, rear bumper top, and rear bumper. The plastic is barely visible from 3 feet away and hardly visible on dark or silver color models. I'm very satisfied, especially knowing it will be protected from the damage. Check www.xpel.com or www.clearmask.com for additional info. If you decide to order it, call Alan at 407-927-1900. (approx $170) or 1-407-833-0505 or invinca-shield.com. He is the cheapest.
Good luck
#12
Invinca-shield
That looks like one of my old messages! I highly recommend Invinca-shield - www.invinca-shield.com
You can call Alan Seligman at 407-927-1900, tell him I sent you, he'll treat you right!
There are photos of my install at my website:
http://www.smiley.net/boxster/
Enjoy!
You can call Alan Seligman at 407-927-1900, tell him I sent you, he'll treat you right!
There are photos of my install at my website:
http://www.smiley.net/boxster/
Enjoy!
#14
Personally, I have a Colgan 2-piece. Although, I havent used it since I installed the RMM Grill, I am thinking about pulling it out when I drive to Atlanta on Friday. Thing is I'm going to have to get creative, whereas the stock grill is open, the RMM is mesh, I might have to make a small incision in the mesh to pull the straps through, and I will have to find alternate securing points.
There's is one annoying factor, which I have never previously experienced with colgan bras's on past cars (3 BMW's, GTI)- this one starts to lift at about 80+ mph. Drives me crazy, but, it's worth the extra debri protection especially on "hazard highway" otherwise known as I-95. It's also serves as passive speed governor
There's is one annoying factor, which I have never previously experienced with colgan bras's on past cars (3 BMW's, GTI)- this one starts to lift at about 80+ mph. Drives me crazy, but, it's worth the extra debri protection especially on "hazard highway" otherwise known as I-95. It's also serves as passive speed governor
#15
Driver School Candidate
Join Date: Jul 2002
Location: CA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Is this the 2 piece Iron Toad Front end mask?
If so, can you install just one piece (hood)?
Paddy Wagon, I wonder the same. Additionally, what kind of material are they? Leather or pleather? Either or neither? hehe. Would like to know.
If so, can you install just one piece (hood)?
Paddy Wagon, I wonder the same. Additionally, what kind of material are they? Leather or pleather? Either or neither? hehe. Would like to know.