door lock was fixed?
12-15-09, 07:10 PM
#1
Driver
Thread Starter
Join Date: Dec 2007
Location: new jersey
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
door lock was fixed?
so i did the door actuator piggy back mod. it all worked. driving home from my buddy's house where we did the mod i park and lock my door and nothing worked again. i'm going to look at it when i can. any ideas?
12-16-09, 08:06 AM
#3
Driver
Thread Starter
Join Date: Dec 2007
Location: new jersey
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
yeah i'm thinking it's the wiring. because i know for a fact that motor and the rod are on there tight. we shall see thursday. i'll take some pictures of the mod and post them up.
12-16-09, 10:27 AM
#4
This happened to me. After many months, piggy-back stopped working. Actuator had slipped out of position. In the original install I was concerned about over-tightening actuator mounting screws. As it turns out, I didn't make them tight enough.
12-17-09, 10:56 PM
#6
Driver
Thread Starter
Join Date: Dec 2007
Location: new jersey
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
turns out that the connecter that plugs into my drivers window switches wasn't plugged in all the way, thus it was giving me trouble. almost took my entire door apart before i figured that out. but it works well now. any ideas on how long this actuator lasts?
Thread
Thread Starter
Forum
Replies
Last Post
Bocatrip
LS - 3rd Gen (2001-2006)
14
07-08-19 08:09 AM
MPLexus301
2Gen GS430 / 400/ 300 Classifieds (98-05)
10
10-09-09 10:07 AM
e-man
GS - 2nd Gen (1998-2005)
17
03-22-06 07:12 AM