When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Took about 20 minutes because for some reason the 2 screws holding the bezel was extremely tight.
The way I work .. it will probably take me 2 hrs or more
I wish mine just took me 20 minutes... I was playing with it for around 20-minutes at a time, before I almost gave up... I found a screwdriver that was just slightly larger than the distance from the bottom bezel to the screw. I pried it in there & then started turning. My biggest issue was slippage because the screw was in there so tight. Once the screws loosened, I took a regular screwdriver & the rest still took me over 20 minutes, but less than 2 hrs...
Just did my dash light being that it was brought up in this thread. Took about 15mins. Yes the bezel screws are really tight for some reason. Just takes the right phillips to loosen them.
CD2? I thought they only made oil additives? As far as the wing, I bet it`s a front wheel drive right? Most early FWD`s didnt have the wing in the back. Quick way to tell if awd,or fwd. btw, looks great!
My 300 was AWD and didn't have a wing. I got it within a few months of the RX debut. Lexus seemed to have added a few things soon after like the bumper guard. When I asked my dealer about it, they took my car in the back and put one on for free