New CELs
#1
Driver
Thread Starter
New CELs
I just popped these 3 today...
The 1150 actually shut off the second time it was read. Has anyone else had this combination, and if so, what might the solution have been?
P1150 - Air / Fuel ratio sensor circuit range /performance
malfunction (bank 1 sensor 2)
Probable cause :
1- Fuel Pump, Injector or pressure regulator fault
2- Vacuum Leak on engine
3- Faulty AF sensor heater circuit
4- Failed AF Sensor
P0136 - Heated oxygen sensor - bank 1 sensor 2 (H02S12)
circuit malfunction
Probable cause :
1- Open or short circuit condition
2- Air / Fuel ratio concern
3- Air leak near sensor
4- Faulty H02S12 (Bank 1 Sensor 2)
P0171 - System too lean - bank 1 (Cylinder number 1 denotes bank 1)
Probable cause :
1- Lean Air / Fuel ratio Fuel injector or vacuum leak
2- MAF sensor concern
3- ECT sensor fault
4- Faulty H02S (heated oxygen sensor)
The 1150 actually shut off the second time it was read. Has anyone else had this combination, and if so, what might the solution have been?
P1150 - Air / Fuel ratio sensor circuit range /performance
malfunction (bank 1 sensor 2)
Probable cause :
1- Fuel Pump, Injector or pressure regulator fault
2- Vacuum Leak on engine
3- Faulty AF sensor heater circuit
4- Failed AF Sensor
P0136 - Heated oxygen sensor - bank 1 sensor 2 (H02S12)
circuit malfunction
Probable cause :
1- Open or short circuit condition
2- Air / Fuel ratio concern
3- Air leak near sensor
4- Faulty H02S12 (Bank 1 Sensor 2)
P0171 - System too lean - bank 1 (Cylinder number 1 denotes bank 1)
Probable cause :
1- Lean Air / Fuel ratio Fuel injector or vacuum leak
2- MAF sensor concern
3- ECT sensor fault
4- Faulty H02S (heated oxygen sensor)
Thread
Thread Starter
Forum
Replies
Last Post