Originally Posted by arozz

Hi I also have this problem (2000 es300 with 100k miles does not burn oil and in very good condition)... No problem starting the car and little hesitation or stuttering when idling(750 RPM idle) and driving, however once the car reaches full operating temperature I experience more sever jerking and trouble accelerating. I replaced spark plugs, coils, and still got misfire with codes p0300 p0301 p0303 p0305.

A few days later the car did the same except when I got to full operating temp, extreme jerking and the car did not want to shift to final drive gear. (gear 1 to 3 was fine, once I got on the highway the car didn't want to go into 4th)(revving at 3000 RPM @ 50 MPH and 4000 RPM @ 60 MPH) At this point CHECK ENGINE light was flashing so I got off the highway and drove back home to re-scan the car.

P1349 appeared, from the research I've done and info from you guys, my next step is to replace the 2 VVT-I solenoids (Camshaft timing oil control valve)
as well as the 2 oil control valve filters.

I will update on if this solved the problem.