Hey...Those aren't 16's!
07-30-03, 04:11 PM
#41
Pole Position
Join Date: May 2003
Location: Texas
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
FINALLY!!!!
the first RX300 that gives me a woody
Daddy-O you've moved that thing so far away from "soccer-mom"!! I'm proud of ya brutha!
now tell us all the story of how you got them thar wheels
the first RX300 that gives me a woody
Daddy-O you've moved that thing so far away from "soccer-mom"!! I'm proud of ya brutha!
now tell us all the story of how you got them thar wheels
07-31-03, 06:41 PM
#42
Lexus Champion
Thread Starter
07-31-03, 06:55 PM
#43
Lexus Champion
Thread Starter
One last note on this set up. The OEM Lexus 18's are a +35 offset. Some folks have mentioned that +20 was needed for the rears. TireRack recommended a +15 for the rears and +20 for the fronts, meaning I needed spacers fro my wheels. I bought H&R 25mm spacers, so my actual offset is +10 all around.
I bought the spacers from http://www.ecstuning.com. If they don't have the size you need, they arrange to have them shipped direct to you from H&R. It saves time and money. Ask for Jack.
Per H&R and Lexus, the spacers and wheels were hand torqued to 76 ft.lb.
Per Tire rack, the tires are inflated to 36 lb.
I bought the spacers from http://www.ecstuning.com. If they don't have the size you need, they arrange to have them shipped direct to you from H&R. It saves time and money. Ask for Jack.
Per H&R and Lexus, the spacers and wheels were hand torqued to 76 ft.lb.
Per Tire rack, the tires are inflated to 36 lb.
07-31-03, 07:48 PM
#45
Rookie
Join Date: Jul 2003
Location: New York
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
very nice...very nice...congrats....where did you buy the RMM grill?...can it be ordered painted to match original lexus colors or do you buy the grill and then find your own painter?...any info would be great?...easy to install?...Rob